3M 50-Piece PPS 13.5 oz. Midi 200 Micron Lids/Liners Kit

3M Model: 16112

Enter your email address and we'll let you know when it's available

OUT OF STOCK
3M 50-Piece PPS 13.5 oz. Midi 200 Micron Lids/Liners Kit 3M Model: 16112

Product Features & specs :

3M 50-Piece PPS 13.5 oz. Midi 200 Micron Lids/Liners Kit

Details

This Midi Kit contains 50 lids with 200 micron filters and 50 liners, along with a free midi cup, collar and one generic mix ratio insert.

PPS replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use, meaning less operator exposure to solvents and reduction in VOCs.

Since PPS uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.

Features:

  • 50 disposable lids with pre-welded filters for paint mixing, filtering and spraying of coatings including primer, sealer, base coat and clear coat

  • Reusable midi size cup and collar with a generic mix volume ratio insert

  • 3M PPS has the ability to reduce solvents by up to 70% from traditional gravity cups

  • Fast and easy clean up for reduced cycle times

  • Ability to spray at all angles (90 degree to the work surface or even upside down) for consistent material transfer which helps reduce overspray, ultimately resulting in lower material consumption

What’s Included:

  • (50) Lids with 200 Micron Filters

  • (50) Liners

  • (1) 13.5 oz. Midi Cup and Collar

Cup Capacity

13.5 oz

Reviews :

Q & A :