JET GH-26120ZH 4-1/8 in. Lathe with ACU-RITE 200S DRO and Taper Attachment

JET Model: 321895

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET GH-26120ZH 4-1/8 in. Lathe with ACU-RITE 200S DRO and Taper Attachment JET Model: 321895

Product Features & specs :

JET GH-26120ZH 4-1/8 in. Lathe with ACU-RITE 200S DRO and Taper Attachment

Details

The Jet GH-26120ZH 4-1/8 in. Lathe with ACU-RITE 200S DRO and Taper Attachment operates on a centralized gear system. The motor power is transferred through four v-belts to a shaft which transmits energy through a multi-disc friction clutch and various gear pairs to the spindle. The clutch also controls the spindle's direction of rotation. Through clutch disengagement, the operator can stop the spindle without turning off the motor, which will prolong the life of the motor. The GH-26120ZH features a clutch operated headstock, universal gearbox, and a rapid traverse on the apron that makes this lathe perfect for high-output production applications. Features you've come to expect in a Jet Lathe.

Features:

  • Lathe bed is made of cast iron with low vibration and high rigidity

  • Two precision-ground v-slideways, reinforced by supersonic frequency hardening, offer precision guidance for the carriage

  • The headstock is cast from high-grade, low-vibration cast iron with the spindle supported by a cylindrical bearing at the front, a tapered roller bearing, and a ball bearing

  • Lathe adopts a three-axle sliding common gear mechanism which together with the thread selection change mechanism and doubling mechanism, enable it to cut a comprehensive range of metric, modular, and diametrical pitch threads eliminating the need for gear changes where special thread is required

  • Use the hand wheel or the feed direction handle to move the bed-mounted rack and pinion, and make quick travel of the apron for better positioning

  • Cross-slide is mounted on the saddle and used for cross feed operations moving on an adjustable dovetailed slide

  • T-slotted compound rest can be rotated 360 degrees allowing tapers to be turned

  • Turret designed tool post holds up to four tools simultaneously and includes an indexing function

  • Tailstock with a heavy duty quill and an etched graduation scale slides on a v-way, and can be locked at any location with the clamping lever

  • Spindle rotation can be reversed by simply moving the control lever mounted at the right of the carriage

  • The traveling setting rod can be rotated into six positions to adjust the contact between stops and the limit switch

  • Steady rests serves as a support for shafts on the bedway

  • Two fingers move the travelling follow rest to prevent your work piece from flexing under the pressure of the cutting tool

  • An adjustable halogen lamp illuminates the lathe and holds an independent on/off switch

  • A foot brake activates a braking strap on the motor to stop the lathe during emergencies

What’s Included:

  • GH-26120ZH 4-1/8 in. Lathe with ACU-RITE 200S DRO - 321895

  • Taper Attachment - 321293

  • (2) Steady Rests

  • Follow Rest

  • Three Jaw Scroll Chuck

  • Drive Place

  • Four Jaw Independent Chuck

  • Face Plate

  • 170 - 210mm Round Nut Spanner

  • (4) Change Gears - 63T, 69T, 78T, 90T

  • Tool Box Kit

Spindle Speed Settings

12

Range of Inch Threads (TPI)

4 - 112

PreWired Voltage

230V

Max. Compound Slide Travel

3-1/2 in.

Bed Width

10-1/2 in

Range of Longitudinal Feeds (IPR)

0.0012 in. - 0.0294 in.

No. of Inch Threads

40

Cross Slide Travel

6-3/8 in

Spindle Speed Range (RPM)

40 - 1800

Range of Metric Threads

0.45 - 7.5

Steady Rest Capacity

3-3/4 in

No. of Metric Threads

22

Range of Cross Feeds (IPR)

0.0003 - 0.0103

Distance Between Centers

40 in

Tool Size

5/8 in. x 5/8 in.

Tailstock Spindle Taper

MT-3

Motor Phase

3

Horsepower

3

Spindle Mount Taper

MT-5

Carriage Travel

37-1/2 in

AC Voltage

230/460V

Drive Type

Geared Head Clutch

No. of Longitudinal Feed Rates

40

No. of Cross Feed Rates

40

Max. Tailstock Spindle Travel

4-3/4 in.

Spindle Mount

D1-4

Length

120 in.

Width

26 in.

Weight

9362 lbs.

Warranty Term

2 Year Limited

Reviews :

Q & A :

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


2-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited two-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.