Makita 15 Degree 3/4 in. - 1-3/4 in. Coil Roofing Nailer

Makita Model: AN453

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Makita 15 Degree 3/4 in. - 1-3/4 in. Coil Roofing Nailer Makita Model: AN453

Product Features & specs :

Makita 15 Degree 3/4 in. - 1-3/4 in. Coil Roofing Nailer

Details

Built-in air filter prevents dust or foreign matter from entering the tool

Features:

  • Built-in magnet ensures proper loading and alignment of initial nail

  • Contoured handle and conforming rubber grip for operator comfort

  • Uses standard wire collated coil of 120 nails

  • For nailing of asphalt and fiberglass shingles

  • Quick dial adjustment of 9 settings for precise control of nail depth

  • Double head valve allows nailer to recycle quickly

What’s Included:

  • 1-3/4 in. Roofing Coil Nailer - AN453

  • Hex Wrench - 783202-0

  • Oil Supply - 181434-7

  • Safety Goggles - 192517-8

Dry Fire Lockout

No

Fastener Length (Max.)

1-3/4 in

Max. Fastener Length

1-3/4 in

Fastener Type

Coil Nails

Operating Pressure (PSI)

65 - 120

Lubrication

Oil-Lube

Fastener Length (Min.)

3/4 in

Fastener Capacity

120

Magazine Angle

15 Degrees

Tip Style

Shingle Guide

Firing Modes

Contact/Sequential Actuation

Fitting Type

NPT

Min. Fastener Length

3/4 in

Fastener Collation

Wire Weld Collation

Depth of Drive

Adjustable

Magazine Type

Canister Loading

Length

10.375 in.

Width

4.625 in.

Height

10.625 in.

Weight

5.2 lbs.

Warranty Term

3 Year Limited

Reviews :

Q & A :

Warranty:

Warranty Information

Makita 3 Year Pneumatic Nailer Warranty

Each Makita Pneumatic Nailer is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Pneumatic Nailer within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Every Makita Pneumatic Nailer is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase. Should any trouble develop during the three-year period, return the COMPLETE Pneumatic Nailer, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.
  • The tool has been abused, misused or improperly maintained. With clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting.
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the expiration of any express warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.