Makita HR5212C 15 Amp 2 in. AVT SDS-MAX Rotary Hammer

Makita Model: HR5212C

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Makita HR5212C 15 Amp 2 in. AVT SDS-MAX Rotary Hammer Makita Model: HR5212C

Product Features & specs :

Makita HR5212C 15 Amp 2 in. AVT SDS-MAX Rotary Hammer

Details

The Makita HR5212C 15 Amp 2 in. AVT SDS-MAX Rotary Hammer is engineered for a range of concrete applications including drilling/coring through-holes for pipes, setting larger anchors, securing tilt-wall supports, small chipping applications, and more. It has a powerful 15 amp motor produces 14 ft-lbs. of impact energy to handle demanding applications, with Anti-Vibration Technology that synchronizes to more effectively reduce vibration. The variable speed control dial enables you to match the speed to the application for greater versatility, while the torque limiting clutch is engineered to prevent gear damage by automatically disengaging gears if the bit binds. The HR5212C also has a Soft Start system to suppress start-up reaction and provide you with more control and accuracy.

Features:

  • Powerful 15 amp motor delivers 14 ft-lbs. of impact energy to handle the most demanding applications

  • Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration

  • Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration

  • Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from you both at the rear handle and side handle

  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit

  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation

  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

  • Soft start suppresses start-up reaction for more control and better accuracy

  • LED service light notifies you approximately 8 hours before the brushes need to be replaced

  • LED power light indicates switch failure or cord damage

  • Variable speed control dial enables you to match the speed to the application for greater versatility

  • Torque limiting clutch engineered prevents gear damage by automatically disengaging gears if the bit binds

  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling

  • Automatic brush cut-off protects commutator from damage for longer tool life

  • 2-mode operation for "Chipping Only" or "Hammering with Rotation

What’s Included:

  • 15 Amp 2 in. AVT SDS-MAX Rotary Hammer - HR5212C

  • Hammer Bit Grease - 194683-7

  • Oil Wiping Cloth - 443122-7

  • Cloth F/Wiping Oil - 443122-7

  • Depth Rod - HR4013C

  • D-Handle - 417003-1

  • Straight Handle - 454781-2

  • Straight Handle Assembly - 135629-4

Impact Energy

19 Joules

Amperage

15

Batteries Included

0

Voltage

120V

Chuck Type

SDS-Max

Length

23.5 in.

Weight

26.2 lbs.

Warranty Term

1 Year Limited

Reviews :

Q & A :

Warranty:

Warranty Information

Makita Standard Warranty

The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.