Makita EK8100 16 in. Gas 81cc Power Cutter

Makita Model: EK8100

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Gasoline engine exhaust (condensates/extracts), which is known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.
Makita EK8100 16 in. Gas 81cc Power Cutter Makita Model: EK8100

Product Features & specs :

Makita EK8100 16 in. Gas 81cc Power Cutter

Details

Makita's EK8100 16 in. Gas Power Cutter has tool-less access to the pre-filter which allows for easy cleaning for the user. It also has tension springs in the clutch which extends the life of the clutch. Makita uses a 120mm fly wheel with 28 vanes for optimal air routing, this allows for longer engine life, better combustion and less likely hood of seizure. Its cutting arm position changes simply from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above ground. Water kit assembled to saw for use with garden hose, dolly and gravity feed tank (DT2010 Sold Separately).

Features:

  • Powerful 81cc engine produces 5.6 HP to complete the most challenging applications

  • Ignition coil with start support function stores electrical energy with each pull for more efficient ignition at start up

  • SLR muffler recycles unburned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption

  • Improved decompression valve and metering spring for precise fuel regulation

  • On-Off-Choke operation switch on a single lever for operator convenience

  • Microchip controlled carburetor engineered to compensate engine timing according to work load

  • Five-stages, foam-paper-nylon system with advance direction air flow provides clear air for better saw performance

  • Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb, edges, walls or directly above the ground

  • Four vibration-absorbing rubber engine mount and two mass-dampening system for reduced vibration

  • Aluminum guard and wheel press plates for reduced weight

What’s Included:

  • 16 in. Gas 81cc Power Cutter - EK8100

  • 16 in. Masonry Abrasive Cut-Off Wheel - 966-161-020

  • Universal Wrench - 941-719-140

  • Torx Wrench - 940-827-000

  • Carburetor Screwdriver - 944-340-001

  • 20mm to 1 in. Adapter Ring - 394-228-121

Power Source

Gas

UL Safety

Yes

Depth of Cut (90 Degrees)

5-3/4 in

CSA Safety

No

Wifi compatibility

No

Case Included

No

No-Load Speed (SFM)

9350

Blade Diameter

16 in

Bluetooth Compatibility

No

Horsepower

5.6

Motor Type

Brushed

Arbor Size

1 in

ETL Safety

No

Length

32.75 in.

Width

20 in.

Height

12.5 in.

Weight

23.3 lbs.

Warranty Term

1 Year

Reviews :

Q & A :