Free Shipping on orders over $199 $99
Same day shipping on most orders
Model#: PWMN1791264K
Condition:
New

What are the different product conditions?

New
Brand new items;Full manufacturer warranty available
Reconditioned
Manufacturer inspected, repaired and tested items; CPO 60 day money back guarantee
Open Box
New or Recon items with possible minor cosmetic damage; CPO 60 day money back guarantee
Certified
Returned items inspected, repaired and tested by CPO technicians; CPO 60 day money back guarantee

Powermatic 719T 1-Phase 1-Horsepower 115/230V Tilt Table Mortiser

  • Powermatic 719T 1-Phase 1-Horsepower 115/230V Tilt Table Mortiser
Free Shipping
(continental U.S.)
+
Out of Stock
Want an email when it's back in stock?

Details

The 719T Tilt Table Mortiser features heavy-duty cast-iron construction and a powerful 1 HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack-and-pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. The large 20-1/4 in. x 7 in. table gives plenty of work support and will adjust to any angle between 0 and 35 degrees. Adjustable linear stops and flip down stop allow for precise repeatability. The quick-adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpiece. Heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.
Features:
  • 1 HP TEFC motor
  • Work stop for repeat cuts
  • Depth and length stops
  • Enclosed stand with shelf
  • Drill bit adapter
  • Quick-release vise for speedy release of work material
  • Chuck extension adapter
Includes:
  • 719T 1 HP Tilt Table Mortiser - 1791264K
  • Chisel & Tool Holder
  • 1/2 in. Drill Chuck
  • 4 in. Chuck Key
  • Removable Safety Switch Key
Downloads:

Specifications

Net Weight: 276 lbs.
Shipping Weight: 292 lbs.

Recommendations

Reviews

4.7 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
3
0
0
0
Recommendations
Yes, I would recommend this to a friend (9)
Pros
Easy To Use (8)
Powerful (8)
Ergonomic Design (1)
Cons
Heavy (2)
Best Uses
Frequent Use (3)
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
YOU GET WHAT YOU PAY FOR
Easy set-up, but heavy. Assembly tip: lay the machine on its back, attach the base, then stand it up. I did it myself, but with an extra person you could avoid the potential hernia.
Quiet, powerful and accurate. Could you ask for more from a tool. Fit and finish were top notch. I fitted mine with the premium Lee Valley chisels and they do not require the chuck extension (supplied). So far have only done some test cuts and have been impressed. I will be adding a lift to the base as it's quite short for me, I'm 6'4" and find it uncomfortable leaning over that much.
I considered a benchtop unit but didn't want to contemplate upgrading in 6 months (been there, done that). This machine should fit my present and future needs.
November 28, 2009
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Cons
Heavy
A major workhorse
I do a lot of interior yacht carpentry and have recently been dabbling with some custom furniture for home use; this unit is a major time saver! The table clamp and ability to move the table L-R as well as front-back (versus having to adjust the work piece) is wonderful when it comes to ganging pieces up and doing a lot of consistent and accurate mortises. Well worth the price tag! Accuracy and finish are top notch and it's operation is quiet and fluid. [...]once set up the weight is a welcome benefit (this thing is rock solid and does not vibrate). Very happy with it!
February 12, 2010
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
Accurate and percise
Ease of use;timesaver;percise
October 19, 2011
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Cons
Heavy
Best Uses
Frequent Use
Accurate with clean cuts
Heavy and solidly built. Mortise cuts are clean, and accurate. Being able to move the table is a great time saver when it comes to indexing the cuts. Great tool. If you don't have a helper when putting together, lay the tool on its back. Attach the cabinet and lift the unit up as a whole.
April 23, 2012
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Great Tool. Build Like A Rock
I was pretty impressed with how beefy and sturdy this tool is. It seems like the stand could be like a foot taller but I'm not going to let that sway my review. The tool does exactly what its supposed to do and it seems like it will last forever. I can't believe how fast I can make mortises now.
February 17, 2013
Recommendations
Yes, I would recommend this to a friend
Great Mortiser
I make Tables Chairs & Bar stools Very smooth operation easy to repeat mortise holes.Very powerful cuts through oak,cherry & Mahogany with ease. I would highly recomend this to a friend
November 29, 2013
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Powerful Mortiser
This mortiser works very well. After properly adjusting, you can cut mortises cleanly & quickly. The table has adjustable gibbs to take out any play. The table & fences were flat. It has adjustable stops for cutting the mortise length & an adjustable stop for placing your work piece on the table. This makes repeating operations quick and easy. This mortiser on sale was double the cost of a good bench top model, but it is 10 times the machine. If you build furniture or doors using a lot of mortises you should definitely consider purchasing this machine. It will really cut down on the time you spend cutting mortises. CPO had this mortiser drop shipped from Powermatic. It was delivered in 4 days in perfect condition. I have never had a bad purchasing experience from CPO. Note: The mortiser table is slightly low, @32.5" from the floor, so you might consider building a fixed or rolling base to raise it up a few inches. I'm 6'5" and built a 7" rolling base to raise the table to 39.5"
October 16, 2014
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Best Uses
Frequent Use
Initial opinions on 719T Mortiser
Just getting started with it, but the product was shipped quickly and arrived in great shape.

Initial feelings are that it was too low. I am 6'1" and the table was down below my waist. Much like the Laguna SUV14" bandsaw. I put both on 8" platforms and they are much more ergonomic for me.

The setup was very easy and took around 30-45 minutes. Initially the plunging action was very stiff, but I cleaned up the ways and used a little white lithium grease on them and the action is better.

Have not done a ton of work with it yet, but love the x-y table feature as well as the quick clamping feature and it seems like it will have tons of power.

All the reviews I read on this machine before purchasing were favorable and I would agree with all of them.
March 20, 2013
Recommendations
Yes, I would recommend this to a friend
Pros
Easy To Use
Powerful
Great Purchase
The only down side, not made in the USA
April 10, 2011

Questions & Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Does this come with any bits?
Fyrfightnfool on Nov 24, 2015
BEST ANSWER: The Powermatic 1791264k does not come with any bits.
Is this mortiser made in the USA?
bill on Jan 31, 2015
BEST ANSWER: Hi Bill,

This item is manufactured in Taiwan.

Warranty

Powermatic 5 Year Warranty


WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)


WHAT IS COVERED

This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.


WHO IS COVERED

This warranty covers only the initial purchaser of the product.


WHAT IS THE PERIOD OF COVERAGE

The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.


WHAT IS NOT COVERED

The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.


HOW TO GET SERVICE

The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.


You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES

This warranty gives you specific legal rights; you may also have other rights which vary from state to state.


LIMITATIONS ON THIS WARRANTY

WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.


WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.