Rockwell 15 Amp 10 in. Table Saw with Laser Guide

Rockwell Model: RK7241S

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), a chemical known to the State of California to cause Cancer and Birth Defect/Reproductive Harm and Lead, a chemical known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Rockwell 15 Amp 10 in. Table Saw with Laser Guide Rockwell Model: RK7241S

Product Features & specs :

Rockwell 15 Amp 10 in. Table Saw with Laser Guide

Details

The Rockwell RK7241S Table Saw with Laser features the most cutting depth of any saw in its class. A powerful, rugged and capable jobsite saw, this table saw has an exclusive laser indicator that adjusts to the blade tilt. The unique laser cut line indicator shows the exact place the blade will cut the material, so cuts are more precise. The saw comes on a trolley stand for easy portability across the jobsite.

Features:

  • Heavy-duty, yet versatile and light weight for the jobsite, work shop or cabinet shop

  • Most cutting depth of any saw in its class at 3-9/16 in, capable of cutting a 4x4 post in one pass

  • Folding fence for extra wide cuts

  • Exclusive laser indicator adjusts blade tilt for more precise cuts

  • Fully assembled trolley and stand for portability between jobsites

  • On-board storage for all tools, keeping them easily accessible

  • Oversized dust bag for less mess during operation

  • With steel rails as opposed to aluminum; which provides for extra rail durability

  • Dovetailed miter gauge slot to prevent the gauge from falling out

What’s Included:

  • 15 Amp 10 in. Table Saw with Laser Guide - RK7241S

  • Rip Fence

  • Miter Gauge

  • Push Stick

  • Riving Knife

  • Dust Bag

Power Source

Corded

Blade Guard System

Yes

Dado Blade Width (Max.)

7/16 in

Table Type

Aluminum

Amperage

15

UL Safety

Yes

Wifi compatibility

No

Rip Capacity (Right)

30 in

Blade Diameter

10 in

Bluetooth Compatibility

No

Blade Tilt

Left

Motor Type

Brushed

Dado Blade Diameter (Max.)

6 in

Table Width (w/ Extension)

36-3/4 in

Arbor Size

5/8 in

Depth of Cut (45 Degrees)

2-9/16 in

Blade Tilt Range

0 - 45 Degrees

No-Load Speed (RPM)

4800

Depth of Cut (90 Degrees)

3-9/16 in

CSA Safety

No

Case Included

No

Extension Type

Telescoping

Table Width

19 in

Voltage

120V

Table Depth

28-1/2 in

Rip Capacity (Left)

11 in

Dust Collection Type

Dust Bag

ETL Safety

Yes

Length

27.6 in.

Width

17.9 in.

Height

38.8 in.

Weight

73.7 lbs.

Warranty Term

2 Year

Reviews :

Q & A :

Warranty:

Rockwell Power Tools Warranty - All Tools Limited 30-Day Exchange Policy

During the first 30 days after date of purchase, you may exchange a tool which does not work properly due to defects in materials or workmanship by calling our customer service hotline number 866-514-ROCK (7625) to obtain a Return Authorization Number and our Returns Location address. To receive a replacement power tool, you must present a dated proof of purchase and return all original equipment packaged with the original product.

Limited Two Year Warranty

The manufacturer warrants that, for a period of 2 years from the date of purchase, this product shall be free of defects in materials and workmanship. We will repair or replace, at our option, this tool during the warranty period, and we may require that the tool be sent postage prepaid to an approved service center with all original equipment and a dated proof of purchase. Any replacement or repaired power tool will only be covered by the limited warranty for the balance of the warranty period from the date of the original purchase. NOTE: This warranty does not apply to cosmetic imperfections resulting from normal wear and tear.

What is Not Covered

This warranty applies only to the original purchaser at retail and is not transferable. This warranty does NOT cover service or replacement of parts resulting from normal wear. This warranty does NOT cover accessories or battery packs. This warranty does NOT cover malfunction, failure or defects due to:

  • abnormal use, abuse, neglect, or use not in accordance with the operations manual
  • damage resulting from accidents, drops or mishandling of the tool
  • alteration or repairs by other than approved service centers
  • commercial or rental use
  • The manufacturer makes no warranties, representations or promises as to the quality or performance of its power tools other than those specifically stated in this warranty.

    For Service

    Contact our toll-free consumer service line at 1-866-514-7625 to receive a replacement tool or to be directed to an approved service center. When you make a warranty claim or send the tool for warranty service, you must also include a dated proof of purchase.

    Additional Limitations

    This warranty is only valid for products purchased and used in the United States of America, its territories or Canada. Any implied warranty granted under state law, including warranties of merchantability or fitness for a particular purpose, are limited to two years from the date of purchase. The manufacturer is not responsible for direct, indirect, incidental or consequential damages including, but not limited to, liability for loss of income arising from the purchase or use of the product. Some states and provinces do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. The manufacturer declines any responsibility in regards to civil liability arising from abusive use or not in conformity with proper use and maintenance of the machine as described in the operator's manual.

    After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator's manual before using the machine.