Bosch RA1054 Deluxe Router GuideModel: bshnra1054
We’re sorry, but this item is no longer available.
Product Features & specs :
Bosch RA1054 Deluxe Router Guide
- Precision fine adjustment control
- Guides cut along the workpiece or up to 8 in. in from edge
- Easily converts into circle guide for making arcs and circles up to 32 in. in diameter
- Deluxe Router Guide - RA1054
- Pivot plate
- Dust Extraction Hood
- Vacuum Hose Adapter
- Attachment Hardware
The mounting angle was a little awkward at first but it's very easy to get used to after a few minutes of using the guide on your router. No problems so far, %100 satisfied.
over 2 years ago
This table is fantastic mated with the 2.25hp Bosch router. Flawless cuts, was very easy to gain a handle on operation and quick adjustments. I plan on building a workbench so this table can sit flush with the main work surface for longer run pieces and more easy control of larger pieces etc.
Q & A :
A question to you…is it not possible to replace the rods in your guide with longer rods, even if they needed to be machined in a metal shop? I wonder?
out side of rod to outside of rod is 4.31”…about 109.3mm
rods are a scant 3/8”….371”…about 9.4mm
and inside to inside they are about 3.579” or 90.9mm
They are quite rigid and won/t offer much leeway when the guide frame is close to the router, maybe only a few thousands of an inch.
cpo is a great company and it would be worth a phone call to them and ask about their return policy…just in case it is a you decide to try it and it doesn’t quite fit. Like I say, it will need to be about a perfect fit because the Bosch guide is extremely rigid and precise leaving very little leeway, if any, anywhere. Probably why 1/256” (0.1mm) is a quite easy adjustment, 1/512” is easy to read on the dial, but does vary slightly each time I adjust it. In other words, the thing is insanely accurate which leaves very little room for errors in the router base plate. If its close (.020” or something less) it would worth a try in my opinion.
Best to you and have a save 4th.
Fits models 1613, 1617, 1618, 1619 and MR23EVS series routers and bases plus PR011 palm router plunge base.