Bostitch N80CB-1 15 Degree 3-1/4 in. Coil Framing Nailer

Model: bstnn80cb-1
        (17) Write A Review

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Bostitch N80CB-1 15 Degree 3-1/4 in. Coil Framing Nailer Model: bstnn80cb-1

Product Features & specs :

Bostitch N80CB-1 15 Degree 3-1/4 in. Coil Framing Nailer

Details
15 Degree 3-1/4 in. Coil Framing Nailer
Features:
  • Coil magazine holds up to 300 nails for high production applications
  • Quick-open composite canister survives falls
  • Aggressive toe-nailing teeth grip lumber for slip free toe-nailing
What’s Included:
  • Coil Framing Nailer - N80CB
Length
12.06 in.
Width
5.56 in.
Height
13 in.
Weight
8.4 lbs.
Air Inlet Size
1/4 in
Average Air Consumption (SCFM)
7.8
Depth of Drive
Adjustable
Dry Fire Lockout
No
Fastener Capacity
300
Fastener Collation
Wire Weld Collation
Fastener Length (Max.)
3-1/4 in
Fastener Length (Min.)
1-1/2 in
Fastener Type
Framing Nails
Firing Modes
Contact / Sequential Actuation
Fitting Type
NPT
Jam Clearance
Tool-Free
Lubrication
Oil-Lube
Magazine Angle
28 Degrees
Magazine Type
Canister Loading
Nail Gauge
.113 - .131 in
Operating Pressure (PSI)
120
Power Source
Pneumatic
Tip Style
Aggressive

Reviews :

4.4 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
6
2
0
0
Recommendations
Yes, I would recommend this to a friend (17)
Pros
Powerful (6)
Easy To Use (5)
Ergonomic Design (1)
Value (1)
Cons
Heavy (11)
Loud (1)
Best Uses
Home Repair (7)
Frequent Use (1)
Heavy Duty Requirements (1)
Large Projects (1)
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Value
Best Uses
Frequent Use
Heavy Duty Requirements
Large Projects
Small Projects
Home Repair
Jobsite
Nice compact gun
lots of power
Good grip on wood for toe nailing.
Not easy to see how to adjust for shorter nail length.
January 24, 2018
Purchased
1 year ago
Describe Yourself:
Professional
Would you recommend this product?
Yes
Wonderful Gun for the buck ..
This gun is great for Nailing joists, rafters, studs, and fencing.
January 2, 2015
Would you recommend this product?
Yes
Cons
Heavy
I have bought this product before.
Have used this product over 15 years,dependable,versitile in different nails,will last a long time if oiled and maintained.
December 20, 2013
Would you recommend this product?
Yes
Cons
Heavy
Little more the used
Great tool but buyer be ware when buying factory recondition. This tool was very used and abused before it was sent back to the factory. It's a good gun tho and seams to be working well
June 13, 2013
Would you recommend this product?
Yes
I would purchase this product again
I really have not had a chance to use my new nailer yet since the weather has been bad but I did try it out in the my shop and it is fast and very powerful. A person needs to use caution when using this tool. It has a little back lash but very little and that may be due to I am a woman and not a man using this product. Although, I feel I will get used to it very soon.
I can see the advantage of having it already!
Speed and a lot less stress on my right hand which is arthritic already, due to an accident years ago. It is somewhat light even with the nails loaded which is very good when your in a bind or don't have help as I am most of the time.
I would highly recommend this product.
January 14, 2013
Would you recommend this product?
Yes
Cons
Heavy
reliable gun
Has become pretty much the industry standard fir coil framers. Nothing more to say.
July 29, 2012
Would you recommend this product?
Yes
Cons
Heavy
Loud
Cost Effective and Quality Product
This tool is used to assemble pallets. It is heavy, but balanced. It is effective at driving the ring-shanked fasteners we use.
June 25, 2012
Would you recommend this product?
Yes
Cons
Heavy
Bostitch N/N80CB
I used the N80 to drive 2" siding nails for putting up new siding, and retacking roof decking. Nailer is a little heavy for doing work above the shoulders, but I wanted the availability of longer nails if needed, so that the nailer would be more versatile.
June 14, 2012
Would you recommend this product?
Yes
Cons
Heavy
I would recommend buying this tool
Faster production time over the stick nailer less reloading nails
May 17, 2012
Would you recommend this product?
Yes
Very Pleased
Used this nail gun for framing and sheathing along side with my stick nailer. The coil is much more compact allowing it to get into some pretty tight spaces that the stick nailer can't and you're not constantly going back to re-load. Extra weight is easy to get used to. Actually weighed my fully loaded stick nailer and the coil nailer and the difference was only about 1.5 pounds. Not considered significant in my book.
December 9, 2011

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 1 answer
How good is depth adjustment ?
A shopper on Apr 7, 2017
Can I adjust depth on this nailer?
A shopper on Jul 13, 2018
BEST ANSWER: I just Adjust the air pressure

Warranty:

Warranties

Stanley Fastening Systems, L.P. 7 Year Limited Warranty (1 Year for Reconditioned Products) - U.S. and Canada Only  

Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch's option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for reconditioned pneumatic staplers or nailers and for new and reconditioned compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.

This warranty IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND with respect to compressors and tools used in production applications, limits to a period of one (1) year from the date of purchase all implied warranties INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.