Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander

Delta Model: 31-483

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander Delta Model: 31-483

Product Features & specs :

Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander

Details

Heavy-Duty Oscillating Bench Spindle Sander

Features:

  • Heavy-Duty Oscillating Bench Spindle Sander - 31-483

  • 1/4 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 5/8 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 1-1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • Rubber Drums on 1-1/2 in. Spindles

  • Rubber Drums on 2 in. Spindles

  • (4) Inserts

  • Power Lock-Off Pin

  • 2-1/4 in. to 4 in. Dust Port Adaptor

  • (3) Wrenches

What’s Included:

  • Heavy-Duty Oscillating Bench Spindle Sander - 31-483

  • 1/4 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 5/8 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 1-1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • 2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve

  • Rubber Drums on 1-1/2 in. Spindles

  • Rubber Drums on 2 in. Spindles

  • (4) Inserts

  • Power Lock-Off Pin

  • 2-1/4 in. to 4 in. Dust Port Adaptor

  • (3) Wrenches

Power Source

Corded

Oscillating Speed (OPM)

29

Table Type

Cast Iron

Amperage

10

UL Safety

No

Wifi compatibility

No

Table Tilt (Down)

45 Degrees

Bluetooth Compatibility

No

Spindle Speed (RPM)

1725

Type

Bench Top

Sanding Stroke

15/16 in

CSA Safety

Yes

Dust Port Size

2-1/4 in

Table Dimensions

14-3/4 in x 14-3/4 in

Motor Phase

1

Horsepower

0.5

Voltage

115V

Base Dimensions

14.75 in x 14.75 in

AC Voltage

115V

Weight

66 lbs.

Warranty Term

5 Year Limited

Reviews :

Q & A :

Warranty:

Warranty for all Delta Machinery Products - Five Year Limited New Product Warranty (180 days for reconditioned products)

DELTA will repair or replace, at it’s expense, and it’s option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.