Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander

Delta Model: dwwn31-483

Want an email when this item is in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander Delta Model: dwwn31-483

Product Features & specs :

Delta 31-483 Heavy-Duty Oscillating Bench Spindle Sander

Details
Heavy-Duty Oscillating Bench Spindle Sander
Features:
  • Heavy-Duty Oscillating Bench Spindle Sander - 31-483
  • 1/4 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 5/8 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 1-1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • Rubber Drums on 1-1/2 in. Spindles
  • Rubber Drums on 2 in. Spindles
  • (4) Inserts
  • Power Lock-Off Pin
  • 2-1/4 in. to 4 in. Dust Port Adaptor
  • (3) Wrenches
What’s Included:
  • Heavy-Duty Oscillating Bench Spindle Sander - 31-483
  • 1/4 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 5/8 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 1-1/2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • 2 in. Interchangeable Threaded Spindle with 100-Grit Sanding Sleeve
  • Rubber Drums on 1-1/2 in. Spindles
  • Rubber Drums on 2 in. Spindles
  • (4) Inserts
  • Power Lock-Off Pin
  • 2-1/4 in. to 4 in. Dust Port Adaptor
  • (3) Wrenches
Oscillating Speed (OPM)
29
Table Type
Cast Iron
Sanding Stroke
15/16 in
Dust Port Size
2-1/4 in
Table Dimensions
14-3/4 in x 14-3/4 in
Motor Phase
1
Horsepower
0.5
Base Dimensions
14.75 in x 14.75 in
Spindle Speed (RPM)
1725
AC Voltage
115V
Type
Bench Top
Weight
66 lbs.
Warranty Term
5 Year Limited

Reviews :

Q & A :

Warranty:

Warranty for all Delta Machinery Products - Five Year Limited New Product Warranty (180 days for reconditioned products)

DELTA will repair or replace, at it’s expense, and it’s option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.