Factory Reconditioned Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser

Makita Model: LS1019L-R

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Factory Reconditioned Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser Makita Model: LS1019L-R

Product Features & specs :

Factory Reconditioned Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser

Details

The Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you'll get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8 in. capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4 in. baseboard, capacity, it can cut 4x4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction, and more.

The LS1019L is powered by a 15 AMP direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

Features:

  • 10 in. slide miter saw with the crown molding cutting capacity (6-5/8 in. nested) of a 12 in. miter saw

  • Linear ball bearing system engineered to deliver in.dead-on in. accurate cuts

  • Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4 in.)

  • Unique 2-Steel Rail Sliding System design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall

  • Less weight (57.9 lbs.) and the most compact design in its class for easy jobsite portability

  • Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM

  • Increased capacity for up to 6-5/8 in. crown molding (vertically nested), 5-1/4 in. baseboard (vertical), and 12 in. crosscuts at 90 degrees

  • Large-sized aluminum base improves stability of material for efficient cutting

  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life

  • Miters 0-60 degrees left and right; bevels 0-48 degrees left and right

  • Positive miter stops at: 0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, and 60 degrees left or right

  • Electronic speed control maintains constant speed under load for smoother, higher quality cutting

  • Integrated upper and lower 4-3/4 in. tall fence system offers added rigidity for more precise miter and bevel cuts

  • In-front bevel lock for convenient operation

  • Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise in.left-of-blade in. or in.right-of-blade in. cutting

What’s Included:

  • Vertical Vise (122854-6)

  • Dust Bag (122852-0)

  • Triangular Rule (762001-3)

  • 10 in. x 5/8 in. 60T Micro-Polished Miter Saw Blade

  • Hex Wrench 6 (781044-6)

Power Source

Corded

Fence Length

4-3/4 in

Amperage

15

Bevel Angle (Right)

48 Degrees

UL Safety

Yes

Wifi compatibility

No

Batteries Included

0

Blade Diameter

10 in

Cutting Capacity (45 Miter Left/0 Bevel)

2-13/16 in x 8-1/2 in / 3-5/8 in x 7-3/4 in

Miter Angle (Left)

60 Degrees

Cutting Capacity (0 Miter/0 Bevel)

2-13/16 in x 12 in / 3-5/8 in x 11 in

Bluetooth Compatibility

No

Bevel Direction

Dual

Motor Type

Brushed

Cutting Capacity (45 Miter Left/45 Bevel Right)

1-1/8 in x 8-1/2 in / 1-11/16 in x 7-3/4 in

Cut Guidance System

Yes

Maximum Degree Miter Cuts - Left

60 Degrees

Arbor Size

5/8 in

Maximum Cutting Thickness (in.)

12 in

Cutting Capacity (45 Miter Right/45 Bevel Right)

1-1/8 in x 8-1/2 in / 1-11/16 in x 7-3/4 in

No-Load Speed (RPM)

3200

Cutting Capacity (0 Miter/45 Bevel Right)

1-1/8 in x 12 in / 1-11/16 in x 11 in

Bevel Angle (Left)

48 Degrees

CSA Safety

Yes

Bevel Type

Compound

Slide System

Yes

Cutting Capacity (0 Miter/45 Bevel Left)

1-7/8 in x 12 in / 2-3/8 in x 11 in

Maximum Degree Miter Cuts - Right

60

Case Included

No

Cutting Capacity (45 Miter Right/0 Bevel)

2-13/16 in x 8-1/2 in / 3-5/8 in x 7-3/4 in

Keyless/keyed Blade Change

Keyed Change

Positive Miter Detents

6

Miter Angle (Right)

60 Degrees

Miter Type

Compound

Cutting Capacity (45 Miter Left/45 Bevel Left)

1-7/8 in x 8-1/2 in / 2-3/8 in x 7-3/4 in

Voltage

120V

Dust Collection Type

Dust Bag

Cutting Capacity (45 Miter Right/45 Bevel Left)

1-7/8 in x 8-1/2 in / 2-3/8 in x 7-3/4 in

ETL Safety

No

Length

31.75 in.

Width

25.375 in.

Height

26 in.

Weight

57.9 lbs.

Warranty Term

1 Year

Reviews :

Q & A :