Fein AFMT 12 QSL MultiTalent 12V 2.5 Ah Lithium-Ion Oscillating MultiToolFein Model: fenn71292561090
Last 2 In Stock
Product Features & specs :
Fein AFMT 12 QSL MultiTalent 12V 2.5 Ah Lithium-Ion Oscillating MultiTool
- The StarLock Mounting system is pin-less and tool-free allowing for the most efficient accessory changes, taking less than three seconds.
- By integrating four dampening elements, the housing is completely independent of the motor for minimum physical stress and safe operation even in continuous use
- The highest level of performance not found in other oscillating tools with less vibration and noise
- Includes two Safety Cell batteries that protect against overload, overheating, and deep discharge
- AFMT 12 QSL MultiTalent 12V 2.5 Ah Cordless Lithium-Ion Oscillating MultiTool - 71292561090
- 1-3/4 in. Universal E-CUT Saw Blade
- (2) 12V 2.5 Ah Lithium-Ion Batteries
- X Rapid Charger - ALG50
- (3) 80 Grit Sanding Sheet
- (3) 120 Grit Sanding Sheet
- (3) 180 Grit Sanding Sheet
- Backing Pad
- Tool Case
Q & A :
FEIN One Year Standard Warranty
Every FEIN power tool is carefully inspected, tested, and is subject to FEIN Quality Assurance's stringent controls. FEIN grants a manufacturer guarantee for precise construction and faultless material on its power tools for the duration of (1) one year - appropriately as of purchase date.
3-year FEIN PLUS guarantee:
This guarantee period is extended to 3 years for all FEIN power tools purchased after 1/1/2005 (Except FEIN High-Frequency Power Tools, FEIN Accu Tec Screw Guns, FEIN Balancer, FEIN Pipe Processing Tools, FEIN Compressed Air Tools, FEIN Battery Packs and Battery Chargers) if the purchaser has registered within 6 weeks of the purchase date. Registration has to be done by the customer himself on the Internet. Register online here. The proof of registration, which has to be printed out immediately, is valid as the confirmation along with the original sales receipt, which shows the purchase date. Registration can be done only if the customer accepts the storage of the queried information.
In case of a material or construction fault, a free repair will be done or in case a repair is impossible the free replacement of the device with a new one (or possibly a follow-up model).
This warranty does not cover damages that are the result of improper use such as nonobservance of the instructions, overload, operation with wrong voltages, wrong type of electricity, or unsuited accessories, as well as external influence such as dropping or striking. Not covered by the warrantee are furthermore wear from operational use under normal conditions.
Services covered by this guarantee declaration are provided solely by FEIN and by companies explicitly authorized for this by FEIN.
In case of assertion of claims from this warranty the power tool concerned has to be completely submitted or sent in along with the original sales receipt (that shows the purchase date and the product name). Partially or completely disassembled power tools cannot be accepted.
Contractual or legal warranty claims towards the retailer remain untouched by this manufacturer guarantee.
Please note that the 3-year FEIN PLUS guarantee is valid only in certain countries. Please see www.fein.de/warranty for a list of these countries.