GearWrench 1114 Piston Ring Compressor Pliers

GearWrench Model: 1114

Enter your email address and we'll let you know when it's available

OUT OF STOCK
GearWrench 1114 Piston Ring Compressor Pliers GearWrench Model: 1114

Product Features & specs :

GearWrench 1114 Piston Ring Compressor Pliers

Details

Engine rebuilding requires the good piston ring compressors to easily reinstall new rings and pistons without damage. Use these ring compressor pliers with the KD ring compressor bands to easily compress and install new rings and pistons into the engine block regardless of the engine being in our out of the vehicle. Use these pliers with any of the following bands to install pistons from 2-5/8 to 5-7/8 (67mm to 149mm) in diameter.

Features:

  • Use these pliers with any of the following bands to install pistons from 2-5/8 to 5-7/8 (67mm to 149mm) in diameter

  • Self- locking ratchet allows you to compress rings in small increments

  • Pliers can be used parallel or perpendicular to the cylinder block on most bands sizes

What’s Included:

  • Piston Ring Compressor Pliers - 1114

Groove Joint

No

Quantity

1

Warranty Term

Lifetime

Reviews :

Q & A :

Warranty:

Apex Tool Group, LLC warrants products and parts sold by it, insofar as they are of its own manufacture, against defects of material and workmanship, under normal use and service in accordance with its written instructions, recommendations, and ratings for installation, operation, maintenance, and service of products, for a period of ONE YEAR FROM THE DATE OF INITIAL USE, BUT IN NO EVENT SHALL THE WARRANTY EXCEED 24 MONTHS FROM DATE OF DELIVERY TO DISTRIBUTOR. Proof of Purchase with shipment date must be furnished by the user to validate the warranty. This warranty applies only to products manufactured by Apex Tool Group and specifically excludes products manufactured by others. Products not manufactured by Apex Tool Group are warranted only to the extent and in the manner warranted to Apex Tool Group by the manufacturer and then only to the extent Apex Tool Group is able to enforce such warranty. Apex Tool Group’s warranty with respect to products manufactured by it is limited to the repair or replacement, as Apex Tool Group may elect, of any defective part regarding which the Distributor has given 5 days written notice from the discovery of such defect. Installation and transportation costs are not included. Apex Tool Group shall have the option of requiring the return to it of the defective material, transportation prepaid, for inspection. No allowance will be made for repairs without Apex Tool Groups’s approval. APEX TOOL GROUP, LLC MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, AND HEREBY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Apex Tool Group, LLC
1000 Lufkin Road
Apex, NC 27539
Phone: 919-387-0099
Fax: 919-387-2614
www.apextoolgroup.com

GearWrench® hand tools are warranted for Life to be free of defects in material and workmanship. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered by this Warranty.

GearWrench - Consumer Tools

If any GearWrench Hand Tool purchased at a retailer, when used for its intended purpose, fails to give you complete satisfaction, please return it to the retailer location where purchased, or contact Apex Tool Group Consumer Division at (888)-757-1812 for free replacement or return.

GearWrench - Professional Tools

If use of any GearWrench Hand Tool® when used for its intended purpose, fails to give complete satisfaction, return it to your GearWrench Distributor or contact Apex Tool Group Professional Division at (800)-688-8949, and it will be repaired or replaced free of charge.

*Except Torque Products

*GearWrench Torque Products are warranted to (1) be free of defects in material and workmanship for one year and (2) meet out of the box calibration accuracy standards as stated in the product literature. Accuracy standards for calibration are warranted for 90 days from date of purchase. Products for which Warranty Repair is requested should be returned, at Buyer’s cost, for evaluation to:

Warranty Service & Authorized Repair:
Electronic Torque Wrenches
Apex Torque Repair
3000 West Kingsley Road
Garland, TX 75041

All other Torque Products:
Angle Repair & Calibration Service, Inc.
175 Angle Drive
Beckley, West Virginia 25801

GearWrench Torque Products are precision instruments that contain moving parts. These components are subject to normal wear through use and replacement thereof is the responsibility of Buyer. Torque Products should be routinely checked for calibration at an Authorized Repair Center using GearWrench repair parts.