General International BD7004 4A 2-in-1 Belt & Disc Sander

General International Model: BD7004

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
General International BD7004 4A 2-in-1 Belt & Disc Sander General International Model: BD7004

Product Features & specs :

General International BD7004 4A 2-in-1 Belt & Disc Sander

Details

Whoever  said "if you've seen one sander you've seen them all", was wrong. The General international 2-in-1 Belt/Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, an L shaped stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces. It has a 6 inch diameter Aluminum disc backing plate. This heavy duty belt sander is made with a solid cast iron base. The BD7004 Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt bed adjusts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you'll have the capacity to sand whatever you need. The sanding disc is accompanied by a sturdy cast-aluminum work table.

Features:

  • Solid cast iron base & housing, steel & aluminum construction, Durable tilting work table with miter gauge

  • 6 in. diameter aluminum disc backing plate

  • 375 W Motor, 120 V ~60Hz, No-load motor speed: 3450 RPM; Amp: 4, HP- 1/2

  • Miter Gauge, 6 in. peel-&-stick sanding disc, 4 in. x 36 in. Sanding belt

  • 2-1/4 in. I.D. dust port, Includes an L-Shaped steel work stop

  • Safety on/off switch with removable key, Quick release system ensures easy belt change

  • ETL Certified, 37.5lbs

  • Manufacturing facilities are certified to ISO9001 & ISO14001 International standards

  • Orbital & Inline Motion, Lock nut tilt, 18 AWG cord gauge, Lever belt tension, #80 sand paper grit, belt table size: 17 in. x 3-7/8 in., table size 6-1/4 in. x 8-3/4 in.

  • <85 dBa

What’s Included:

  • 4A 2-in-1 Belt & Disc Sander

Power Source

Corded

Belt Length

36 in

Sanding Speed (SPM)

1900

Amperage

4

UL Safety

No

CSA Safety

No

Wifi compatibility

No

Belt Width

4 in

Bluetooth Compatibility

No

Horsepower

0.5

Voltage

120V

Motor Type

Brushed

Table Tilt Range

45 Degrees

ETL Safety

Yes

Length

19 in.

Width

16 in.

Height

10 in.

Weight

37 lbs.

Warranty Term

2 Year

Reviews :

Q & A :