JET J-41002 2 in. x 42 in. Bench Belt and 8 in. Disc Sander

JET Model: 577004
$752.99
free shipping
FREE shipping on orders $149+
free shipping
This item ships directly from manufacturer in 3-5 days
alert warning icon

OR PAY WITH

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET J-41002 2 in. x 42 in. Bench Belt and 8 in. Disc Sander JET Model: 577004
price for vip customer
$752.99

OR PAY WITH

Product Features & specs :

JET J-41002 2 in. x 42 in. Bench Belt and 8 in. Disc Sander

Features:

  • Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right

  • Hinged idler wheel cover

  • Abrasive belt unit does the work of a Jigsaw, coping saw or hand file while removing material and finishing at the same time, allows the operator to get into small openings, plus handle odd shapes and angles

  • Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt

  • Grind, sand or finish large work pieces on the disc unit fast and efficiently, combined with the tilting table, the operator has the advantage of chamfering or beveling, table is slotted to accept miter gauge

  • Delivers sharper, faster cutting action; easy belt changes with a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs

  • When using non-woven synthetic belts, the operator can blend, polish, buff or finish metal surfaces in addition to defuzzing wood surfaces

  • Deluxe miter gauge

  • Cast iron tilting table

  • Cast construction

  • Heavy duty steel base and rubber ft.

  • Removable platen

  • Dust deflector and chute

What’s Included:

  • J-41002, 2 in. x 42 in. Bench Belt and 8 in. Disc Sander - 577004

Power Source

Corded

Belt Length

42 in

Table Type

Cast Iron

Amperage

6.2

UL Safety

No

Belt Operating Speed (SPM)

3100

Disc Table Tilt (Down)

45 Degrees

Belt Width

2 in

Wifi compatibility

No

Belt Table Dimensions

10 in x 6 in

Disc Table Dimensions

10-3/4 in x 7-1/2 in

Bluetooth Compatibility

No

Motor Phase

1

Belt Table Tilt (Up)

45 Degrees

Horsepower

0.75

Motor Type

Brushed

Voltage

115V

Table Slots

5/8 in

Belt Table Tilt (Down)

45 Degrees

ETL Safety

No

Disc Operating Speed (RPM)

3450

Length

20.50 in.

Width

22.75 in.

Height

20 in.

Weight

60 lbs.

Warranty Term

2 Year

Reviews :

Q & A :

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


2-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited two-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.