JET JPS-10TS 1-3/4 HP 10 in. Single Phase Left Tilt ProShop Table Saw with 30 in. ProShop Fence and Riving Knife

JET Model: 708494K

We’re sorry, but this item is no longer available.

JET JPS-10TS 1-3/4 HP 10 in. Single Phase Left Tilt ProShop Table Saw with 30 in. ProShop Fence and Riving Knife JET Model: 708494K

Product Features & specs :

JET JPS-10TS 1-3/4 HP 10 in. Single Phase Left Tilt ProShop Table Saw with 30 in. ProShop Fence and Riving Knife

Details

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contractor-style machine. The saw comes with cast iron wings, the transparent blade guard has independent leaves, and the quick release riving knife reduces the chance for kickbacks. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system has a 30 in. rip capacity.

Features:

  • Riving knife maintains close blade proximity to reduce the chance of kickbacks

  • Integrated arbor lock is accessed from table top for rapid blade change

  • Blade guard and riving knife have quick release for tool-less mounting and removal

  • Enclosed cabinet with exclusive leg stand design for easy assembly

  • Heavy duty cast iron table with T-style miter gauge slot for fine adjustments

  • Sloped cabinet floor and 4 in. extraction port enhance dust collection efficiency

  • High quality, positive locking T-square style fence system

  • Powder coated paint for a long-lasting, chip-resistant finish

  • Easy-to-reach control switch

  • Rigid, left-tilting cast iron trunnion

  • 10 in. blade included

What’s Included:

  • JPS-10TS, 1-3/4 HP 10 in. Single Phase Left Tilt ProShop Table Saw w/ 30 in. ProShop Fence and Riving Knife - 708494K

  • 30 in. ProShop Fence System

  • Cast-Iron Extension Wings

  • 10 in. Blade

  • Riving Knife

Power Source

Corded

Blade Guard System

Yes

Dado Blade Width (Max.)

13/16 in

Fence Length

30 in / 52 in

PreWired Voltage

115V

Table Type

Cast Iron

Amperage

15 / 7.5

UL Safety

Yes

Wifi compatibility

No

Rip Capacity (Right)

30 in

Blade Diameter

10 in

Bluetooth Compatibility

No

Dust Collection

Yes

Blade Tilt

Left

Motor Type

Brushed

Dado Blade Diameter (Max.)

8 in

Table Width (w/ Extension)

60 in

Arbor Size

5/8 in

Depth of Cut (45 Degrees)

2-1/8 in

Blade Tilt Range

0 - 45 Degrees

No-Load Speed (RPM)

4000

Depth of Cut (90 Degrees)

3-1/8 in

CSA Safety

Yes

Extension Type

Sliding

Table Width

20 in

Motor Phase

1

Horsepower

1.75

Voltage

115V/230V

Table Depth

27 in

Rip Capacity (Left)

12 in

ETL Safety

No

Length

82 in.

Width

35 in.

Height

39 in.

Weight

299 lbs.

Warranty Term

5 Year

Reviews :

Q & A :

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


5-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited five-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.