Lincoln Industrial 1 in. Aluminum 1:1 Air-Operated Diaphragm Pump

Lincoln Industrial Model: 85627

We’re sorry, but this item is no longer available.

Lincoln Industrial 1 in. Aluminum 1:1 Air-Operated Diaphragm Pump Lincoln Industrial Model: 85627

Product Features & specs :

Lincoln Industrial 1 in. Aluminum 1:1 Air-Operated Diaphragm Pump

Details

Diaphragm pumps are driven by compressed air. The directional air distribution valve and pilot valve - the "air end" - are located in the center section of the pump. Liquid moves through two manifolds and outer chambers of the pump - the "wet end". Generally, check valves are located at the top and bottom of each outer chamber or on a common manifold. The two outer chambers are connected by suction and discharge manifolds. Lincoln's double diaphragm self-priming design offers many advantages over other pumps.

Features:

  • Pump abrasive and sheer-sensitive materials. Low interval velocities move abrasives easily with no damage. Gentle pumping action does not sheer fragile materials.

  • Pumps viscous materials. Even heavy or solids-laden materials can be pumped.

  • Environmentally friendly. No motors, seals or packing to leak.

  • Self-priming. Able to dry prime under most suction lift or flooded suction conditions.

  • Variable flow. Regulate the inlet air supply to adjust flow.

  • Runs dry without damage.

  • Deadheads against closed discharge. Excessive back pressure stops operation without damage until discharge opens. Eliminates bypass systems or relief valves.

  • Explosion-proof. Eliminates sparking concerns of other electrical or rotating pumps.

What’s Included:

  • 1 in. Aluminum 1:1 Air-Operated Diaphragm Pump - 85627

Construction

Aluminum

Operating Pressure

125

Air Inlet Size

1/2 in.

Length

12 in.

Width

13 in.

Height

12 in.

Weight

16 lbs.

Warranty Term

30 Day

Reviews :

Q & A :