Makita DS4011 8.5 Amp 0 - 600 RPM 1/2 in. Corded Drill with Spade Handle

Model: mktnds4011
        (13) Write A Review

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Makita DS4011 8.5 Amp 0 - 600 RPM 1/2 in. Corded Drill with Spade Handle Model: mktnds4011

Product Features & specs :

Makita DS4011 8.5 Amp 0 - 600 RPM 1/2 in. Corded Drill with Spade Handle

Details
The Makita DS4011 1/2 in. Spade Handle Drill is engineered with a powerful motor to provide improved drilling and mixing performance. An all-bearing construction delivers smooth operating and a heavy-duty industrial chuck delivers positive bit detention. The DS4011 has a rocket switch, rubberized grip, and is doubly insulated for additional protection.
Features:
  • Powerful 8.5 Amp motor engineered for improved drilling and mixing performance
  • 600 RPM provides increased speed and torque for drilling large holes
  • Well-balanced design at only 6.3 lbs. for reduced operator fatigue
  • D-handle rotates 360 degrees with 24 positive stops for multi-position operation
  • Rubberized grip for increased operator comfort
  • All ball bearing construction for smooth operation and longer tool life
  • Heavy duty industrial 1/2 in. drill chuck engineered for positive bit retention
  • Rocker switch for quick transition between forward and reverse operation
  • On-board chuck key storage for fast and convenient bit changes
  • Double insulated
What’s Included:
  • 1/2 in. Spade Handle Drill - DS4011
  • Drill Chuck - 193229-6
  • Chuck Key - 763420-6
  • Side Handle - 152492-0
Length
13.38 in.
Width
3.25 in.
Height
15.75 in.
Weight
6.3 lbs.
Amperage
8.5
Bluetooth Compatibility
No
CSA Safety
No
Case Included
No
Chuck Size
1/2 in
Chuck Type
Keyed
Clutch Settings
No
ETL Safety
No
Handle Type
Spade
Motor Type
Brushed
No-Load Speed (RPM)
0-600
Power Settings
1
Power Source
Corded
UL Safety
Yes
Variable Speed Trigger
Yes
Voltage
120V
Wifi compatibility
No

Reviews :

4.8 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
2
0
0
0
Would you recommend this product?
Yes (13)
Pros
Powerful (13)
Easy To Use (10)
Ergonomic Design (4)
Value (2)
Cons
Heavy (2)
Best Uses
Frequent Use (3)
Heavy Duty Requirements (3)
Large Projects (2)
Jobsite (2)
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Best Uses
Heavy Duty Requirements
Large Projects
Jobsite
This drill is an upgrade for the one I have been using for ten years, very quiet and works well with an external speed controller witch was required for safety reasons. very pleased with the performance so far
July 16, 2019
Purchased
6 months ago
Describe Yourself:
Professional
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Value
Best Uses
Heavy Duty Requirements
This is a great old school drill motor. Hang on with both hands if you are pulling a large bit. I bought it for maintenance work on farm and industrial equipment and it does all we ask of it.
November 13, 2018
Purchased
1 year ago
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Easy to hold on to.
Drives forseners and ship augers no problem.
August 6, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Cons
Heavy
No surprises
Solid and reliable
February 12, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Cons
Heavy
Best Uses
Frequent Use
As expected
Powerful enough for everyday mixibg
January 29, 2016
Would you recommend this product?
Yes
Pros
Powerful
nice drill
Nice drill, bought to mix a thick roof coating material which it did well. I burnt up a smaller drill with that task previously. It is too early to tell how it holds up, but it had plenty of power and did not seam to strain to mix the coating. The fit and finish is very nice, like the rest of my makita tools.
January 15, 2016
Would you recommend this product?
Yes
Pros
Powerful
Great drill
I'm an electrical contractor & have used these drills for many years roughing in new homes, my crew is groing & so is the need for my tool supply, it was an easy choice. I'm glad I found CPO to get such a great deal!
January 1, 2016
Would you recommend this product?
Yes
Pros
Ergonomic Design
Powerful
Best Uses
Frequent Use
quality drill
Primary use for mixing thinset and grout. Makita rarely disappoints.
Great price for quality tool.
December 26, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
GOOD PURCHASE!
GOOD PRODUCT, GOOD PRICE, EXCELLENT SERVICE.
October 15, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Makita Quality as Always
I bought this drill to use with tenon cutters that are like huge pencil sharpeners. It takes a lot of power to sharpen a 4" diameter pencil ( or in this case, put a 3" diameter tenon on a 4" diameter log). This drill handles the task with power to spare. Buy this drill. You will not be dissapointed, but be advised it is a lot heavier than your cordless drill
December 18, 2014

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
I would like to know how this is for mixing buckets of thinset cement for laying tile floors and products of that nature. I do a lot of ceramic tile work and I'm looking for something that can mix both thicker dry mortar batches as well as loose batches .thanks
Chris on Dec 6, 2015
BEST ANSWER: Workking around tile contractors all the time, alot of them use this drill & like me I'm sure would recommend it.
Where is this drill manufactured?
American on Aug 13, 2015
BEST ANSWER: The Makita 1/2 in. Spade Handle Drill is made in JAPAN.

Warranty:

Warranty Information

Makita Standard Warranty

The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.