Makita 80V max XGT (40V max X2) Brushless Lithium-Ion 28 lbs. Cordless AWS Capable AVT Demolition Hammer Kit with 2 Batteries (4 Ah)

Makita Model: GMH02PM

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Makita 80V max XGT (40V max X2) Brushless Lithium-Ion 28 lbs. Cordless AWS Capable AVT Demolition Hammer Kit with 2 Batteries (4 Ah) Makita Model: GMH02PM

Product Features & specs :

Makita 80V max XGT (40V max X2) Brushless Lithium-Ion 28 lbs. Cordless AWS Capable AVT Demolition Hammer Kit with 2 Batteries (4 Ah)

Details

The 80V Max (40V Max X2) XGT Brushless 28 lbs. Demolition Hammer Kit (GMH02PM) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The demolition hammer delivers up to 15% faster breaking than equivalent corded hammer (HM1213C). It accepts SDS-MAX bits.

Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT) is engineered for improved dust and water resistance.

Auto-Start Wireless System (AWS) uses Bluetooth technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.

Features:

  • OUTPOWER: Makita-built brushless motor along with two 40V Max XGT batteries combine to deliver up to 15% faster breaking efficiency than corded equivalent model

  • OUTSMART: Constant speed control automatically applies additional power under load for optimum performance

  • OUTLAST: Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions

  • Anti-Vibration Technology (AVT) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration

  • Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)

  • Dust extraction capability with optional Makita Dust Attachment Kit

  • Soft start suppresses start-up reaction for improved accuracy

  • Soft no-load

  • Built-in L.E.D. light with an independent on/off switch illuminates the work area

  • Variable speed dial enables operator to match the speed to the application

What’s Included:

  • 80V max XGT (40V max X2) Brushless Lithium-Ion 28 lbs. Cordless AWS Capable AVT Demolition Hammer - GMH02Z

  • (2) 40V max XGT 4.0 Ah Lithium-Ion Batteries - BL4040

  • 40V max XGT Dual Port Rapid Optimum Charger - DC40RB

  • Hammer Bit Grease - 194683-7

  • Side Handle

  • Tool Case

Power Source

Cordless

Blows Per Minute(BPM)

950 - 1900

UL Safety

Yes

Power Type

Battery

Wifi compatibility

No

Batteries Included

2

Battery Type

Li-Ion

Battery 2 Amp Hour

4 Ah

Bluetooth Compatibility

Yes

Motor Type

Brushless

Battery Warranty

3 Year

Charge Time

45 Minutes

Charger Included

Yes

Impact Energy

20.2 ft-lbs

Noise Rating

92

CSA Safety

No

Case Included

Yes

BPM

950 - 1900

Case Type

Carrying Case

Battery Amp Hour

4 Ah

Voltage

80V

Handle Type

D

Bit Type

Bull Point

Chuck Type

Keyless

ETL Safety

No

Battery System

XGT

Length

22.625 in.

Weight

27.98 lbs.

Warranty Term

3 Year

Reviews :

Q & A :

Warranty:

Warranty Information

Makita Standard Warranty

The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.