Makita 18V X2 (36V) LXT Lithium-Ion Brushless Cordless 14-in Chain Saw Kit with 4 Batteries (5.0Ah)

Makita Model: XCU03PT1

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Makita 18V X2 (36V) LXT Lithium-Ion Brushless Cordless 14-in Chain Saw Kit with 4 Batteries (5.0Ah) Makita Model: XCU03PT1

Product Features & specs :

Rule the outdoors with cordless chainsaws with no need for gas and have reduced maintenance with instant start

Gas Performance without the Hassles

No need to mix gas, have reliable instant starts, and reduced maintenance.

Makita 18V X2 (36V) LXT Lithium-Ion Brushless Cordless 14-in Chain Saw Kit with 4 Batteries (5.0Ah)

Details

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Brushless Chain Saw Kit (model XCU03PT1). With zero emissions, lower noise, and considerably less maintenance, the Chain Saw is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

The Chain Saw has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

Model XCU03PT1 is a kit and includes the Chain Saw, four fast-charging 18V LXT Lithium-Ion 5 Ah batteries and an efficient 18V Dual Port Rapid Optimum Charger.

It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

Features:

  • Makita-built outer rotor BL brushless motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw

  • Variable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performance

  • "Tool-less" chain adjustment for convenient operation and maintenance

  • Built-in lock-off lever helps prevent the chain from accidentally engaging

  • Built-in L.E.D. on/off switch with auto power-off function

  • Automatically shuts the saw off when operation is delayed for extended battery life

  • Two 18V LXT Lithium-Ion batteries deliver power and performance without leaving the 18V LXT platform

  • Front hand guard engineered to actuate chain brake when engaged

  • 14 in. guide bar for increased capacity

  • Low noise level and zero emissions for operator comfort

  • Weighs only 11.5 lbs. with batteries for reduced operator fatigue

What’s Included:

  • (1) 18V X2 (36V) LXT BL Li-Ion 14 in. Chain Saw - XCU03Z

  • 14 in. Guide Bar - E-00072

  • 14 in. Saw Chain - E-00228

  • 14 in. Chain Cover - 419242-9

  • (4) 18V LXT 5 Ah Li-Ion Batteries - BL1850B

  • 18V LXT Li-Ion Dual Port Charger - DC18RD

Chain Gauge

0.43 in

Power Source

Cordless

UL Safety

Yes

Wifi compatibility

No

Batteries Included

4

Battery Type

Li-Ion

Number of Tools

1

Bluetooth Compatibility

No

Motor Type

Brushless

Battery Warranty

3 Year

Tool-less Chain Tensioning

Yes

Charge Time

45 Minutes

Charger Included

Yes

Bar Length

14 in

No-Load Speed (RPM)

3940

CSA Safety

No

Starter Type

Electric

Case Included

No

Battery Amp Hour

5 Ah

Voltage

18V

Handle Type

Rear Handle

Chain Pitch

3/8 in

ETL Safety

No

Battery System

LXT

Series

X2

Length

30.50 in.

Weight

11.50 lbs.

Warranty Term

3 Year

Reviews :

Q & A :

Warranty:

Warranty Information

Makita LXT Lithium-ion Tool Warranty

Every Makita® Lithium‐Ion Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Lithium‐Ion tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase. Should any trouble develop during the three‐year period for the Lithium‐Ion Power Tool, Battery and/or Charger, return the COMPLETE Power Tool, Battery and/or Charger, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This warranty does not apply to Makita Accessories, like flashlights.

This Warranty does not apply where:

  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool

  • In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the three-year term of this warranty. This warranty gives you specific legal rights, and you many also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.