NOCO GCP1 13 Amp 125V AC Port Plug with Extension Cord

Model: nocngcp1
ratings        (2) Write A Review

We’re sorry, but this item is no longer available.

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
NOCO GCP1 13 Amp 125V AC Port Plug with Extension Cord Model: nocngcp1

Product Features & specs :

NOCO GCP1 13 Amp 125V AC Port Plug with Extension Cord

Details
The GCP1 is an AC Port Plug with an integrated extension cord (16 inches) that offers optimal flexibility and ease of installation. It can mount to the exterior of any vehicle to make the charging port accessible in a more convenient location. Quickly plug-n-play with any extension cord and requires zero cord modifications or hand wiring. Its sleek, ultra low-profile design works seamlessly on any application and includes a snap-fit cap for a watertight seal. Perfect for engine block heaters, battery chargers, home improvement and much more, this unit provides endless possibilities. It is rated for use at 13 Amps, 125 volts, UL certified and fits into any standard 2 inch hole size.
To install the AC Port Plug, drill a 2 inch hole and secure with three screws. The rubberized cap creates a low profile seal against the surface of your vehicle or equipment. No wiring or cable modification is required. Simply mount and plug-in for accessible power.
The GCP1 AC Port Plug simplifies extension cord use and provides convenient power access. With nearly endless applications for equipment and vehicles, GCP1 is perfect for engine block heaters, onboard battery chargers, home improvement and much more. From charging your battery to tailgating, it's got your AC power needs covered.
The GCP1 AC Port Plug was designed to stand up to any test it may experience in the charging world. Unlike other AC charge inlet on the market, the GCP1 was expertly designed and engineered to make sure the prongs never get shoved back inside the casing, providing for 100% connection every time it is used. Also, it only requires a 2 inch mounting hole making it one of the most discreet AC port plugs around.
Features:
  • Peak performance rated at 13 Amps and 125V
  • Integrated extension cable (16 inches) requires no cable modification
  • Easy installation (2 inch hole size) with a watertight seal and snap-fit cap
  • Full-sized AC prongs for maximum conductivity
  • Ultimate flexibility makes it perfect for engine block heaters, battery chargers, home improvement and more
What’s Included:
  • 13 Amp 125V AC Port Plug w/ Extension Cord - GCP1
UL Safety
Yes
Type
AC Port Plug with Extension Cord
CSA Safety
No
Quantity
5
ETL Safety
No
Length
16 in.
Weight
0.47 lbs.

Reviews :

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Would you recommend this product?
Yes (1)
Pros
Easy To Use (1)
Ergonomic Design (1)
Value (1)
Best Uses
Frequent Use (1)
Large Projects (1)
Jobsite (1)
Did the job
I installed the device in the sidewall of my trailer. I cut a 2 inch hole in both sides the trailer wall like they said in the directions the only problem I had was on the inside. The device was now far enough in to clear the plywood on the inside the cord would hit the bottom of the plywood, so I had to carve out the plywood a little bit, screws were supplied but they weren't long enough and I siliconed it in. I wish they would make one with a higher amperage it was very hard to find a heater less than 13 amps
November 1, 2018
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Value
Best Uses
Frequent Use
Large Projects
Jobsite
Just what I wanted,work out great,extremely easy to install everyone should get one.
March 5, 2017
Purchased
over 3 years ago

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!