NOVA 9018 1/2 in. Drill Chuck is a precision chuck for use with wood lathes and drill presses. It includes a 2MT spindle, making it a perfect drill chuck accessory for NOVA lathes, or any lathe or drill press with a 2MT spindle. Capable of holding 1/6 inches/1.58mm through to 1/2inch/12.7mm, this unit comes complete with a Drill Chuck Key. It is backed by a full replacement 2-year warranty from Teknatool International, since 1955.
- Steel Chuck with 1/2 in. capacity
- Can be used for grabbing small turning or pen mandrels on the headstock
- For use with a drill bit in the tailstock
- 2 MT spindle fits most lathes
- 1/2 in. Keyed Chuck with 2MT Spindle - 9018
Compliance and Restrictions
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.Cancer