Powermatic WP2510 25 in. 3-Phase 15-Horsepower 230/460V Planer

Powermatic Model: WP2510

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Powermatic WP2510 25 in. 3-Phase 15-Horsepower 230/460V Planer Powermatic Model: WP2510

Product Features & specs :

Powermatic WP2510 25 in. 3-Phase 15-Horsepower 230/460V Planer

Details

The Powermatic WP2510 Planer has a solid steel helical insert head with four-sided carbide insert knives that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast-iron and has extra-wide side panels that offers rigid bed support and ensures accurate alignment. The segmented, serrated infeed roller with segmented chip breakers has an independent yield of 1/4 in. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. A large 32-3/16 in. x 26 in. precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. A Quick-Set micro-adjustable lever easily raises and lowers the table rollers from 0 in. to 0.05-in.

Features:

  • Solid steel helical insert head with four-sided carbide insert tooling (no adjustment required after changing knives)

  • Reduced sound levels when running and cutting

  • Built with digital readout and simple PC controller to make quick and easy table height setups

  • Segmented serrated infeed roller with segmented chip breakers for planing multiple height stock

  • Each segment has an independent yield of 1/4 in.

  • 3 in. diameter infeed and outfeed rollers are supported by four large, sealed needle bearings for long life

  • Quick-set micro-adjustable lever easily raises and lowers table rollers from 0 in. to 0.050 in. with a touch

  • Frame machined from heavy cast-iron and extra-wide side panels with gibs offers rigid bed support and accurate alignment

  • Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding

  • Three-speed feed selector allows you to quickly change feed rates

  • Large 32-3/16 in. x 26 in. precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock

  • Massive gearbox maintains a positive feed by using a large chain drive to power the infeed and outfeed rollers

  • Gearbox incorporates automatic chain tensioners

  • Dust hood features an excellent dust collection system with a built-in 5 in. dust chute

What’s Included:

  • WP2510 25 in. Planer - 1791303

  • Helical Cutterhead with Four-Sided Inserts

  • Segmented Infeed Rollers

  • Segmented Chip Breakers

  • Pneumatic Screwdriver

  • Dust Hood with 5 in. Dust Port

Knife Length

15 in

Power Source

Corded

Bluetooth Compatibility

No

No. of Knives

174

Cutterhead Speed (RPM)

5000

Knife Width

15 in

Motor Phase

3

PreWired Voltage

230V

Horsepower

15

Planing Depth (Max.)

1/8 in

Motor Type

Brushed

Voltage

230V/460V

Amperage

37 / 18.5

UL Safety

No

Cutterhead Diameter

3-3/8 in

Knife Thickness

2.5 in

Bench-Top

No

Feed Rate - Planing (FPM)

30

Feed Rate - Moulding (FPM)

20

Planing Width (Max.)

25 in

Wifi compatibility

No

Dust Port

Yes

No-Load Speed (CPM)

30000

Material Thickness (Max.)Material Length (Min.)

Auto

ETL Safety

No

Dust Port Size

5 in

Length

42 in.

Width

53.5 in.

Height

60 in.

Weight

1760 lbs.

Warranty Term

5 Year

Reviews :

Q & A :

Warranty:

Powermatic 1 Year Warranty


WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


One Year Warranty for Industrial Products
(Horizontal Panel Saws, Cut Off Saws, Rip Saws, Bandsaws, Jointers, Planers, Oscillating Edge Sanders, Belt Sanders, Shapers, Power Feeders, Mortisers, Dovetailers)


WHAT IS COVERED

This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.


WHO IS COVERED

This warranty covers only the initial purchaser of the product.


WHAT IS THE PERIOD OF COVERAGE

The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.


WHAT IS NOT COVERED

The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.


HOW TO GET SERVICE

The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848. You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.


HOW STATE LAW APPLIES

This warranty gives you specific legal rights; you may also have other rights which vary from state to state.


LIMITATIONS ON THIS WARRANTY

WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.


WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.