Ridgid SeekTech 4 in. Inductive Signal Clamp

Ridgid Model: 20973

We’re sorry, but this item is no longer available.

Ridgid SeekTech 4 in. Inductive Signal Clamp Ridgid Model: 20973

Product Features & specs :

Ridgid SeekTech 4 in. Inductive Signal Clamp

Details

The SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe that is 4 in. or less in diameter when it is not possible to connect transmitter leads directly to the target conductor. When its jaws are closed around a cable or pipe, the clamp couples the transmitted signal onto the conductor by induction. Once the signal is applied to a conductor, it can be traced using a compatible receiver, such as the SeekTech SR-20 or SR-60.

Any SeekTech Line Transmitter (e.g., ST-33Q, ST-510,ST-305) or comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45kHz, and a 1 watt maximum if above 45kHz can be used as a power source. The line transmitter must be jackplug compatible. The clamp may be used with line transmitter frequencies of 8kHz to 262kHz.

Features:

  • Allows users to apply a signal to a cable or pipe when direct connection is not possible

  • Compatible with all RIDGID transmitters

What’s Included:

  • SeekTech 4 in. Inductive Signal Clamp - 20973

Case Included

No

Length

10.5 in.

Width

5.85 in.

Height

1.48 in.

Weight

1.75 lbs.

Warranty Term

Lifetime

Reviews :

Q & A :