Dewalt DWFP2350K 23 Gauge Pin Nailer

Dewalt Model: dewndwfp2350k
ratings        (13) Write A Review

Want an email when this item is in stock?

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to
Dewalt DWFP2350K 23 Gauge Pin Nailer Dewalt Model: dewndwfp2350k

Product Features & specs :

Dewalt DWFP2350K 23 Gauge Pin Nailer

Our 23 Gauge Pin Nailer sets 2 in. nails recessed into oak with the power and adaptability to deliver professional results. This is the ideal tool for contractors, woodworkers, and cabinet builders looking to fasten materials while keeping nail visibility to a minimum. Tool-free jam release and depth adjustment for easy nail removal. Pick up this hard-working pneumatic fastening tool for completing finish and trim jobs.
  • Drives 23 Gauge 2 in. nails recessed into oak
  • World's first 23 Gauge Pin Nailer with tool-free jam release for easy nail removal
  • Tool-free depth adjustment for driving recessed fasteners
  • Oil-free operation reduces risk of oil stains on work surface
  • Low nail lockout with bypass and reload alert
  • Uses 23 Gauge headless pin nails from 5/8 in. to 2 in. length
  • Reversible belt hook for hands-free carrying on the jobsite
What’s Included:
  • 23 Gauge Pin Nailer - DWFP2350K
  • 1/4 in. Fitting
  • 2 No-Mar Tips
  • Carrying Case
  • Owner's Manual
Dry Fire Lockout
Power Source
Fastener Length (Max.)
2 in
Nail Gauge
23 Gauge
Fastener Type
Pin Nails
Fastener Length (Min.)
5/8 in
Jam Clearance
Fastener Capacity
Tip Style
Firing Modes
Selectable Trigger
Motor Type
Fastener Gauge
Depth of Drive
Tool Free
Magazine Type
Bottom Loading
9.2 in.
8.75 in.
2.5 lbs.
Warranty Term
7 Year

Reviews :

4.8 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Would you recommend this product?
No (1)
Easy To Use (1)
Ergonomic Design (1)
Lightweight (1)
Best Uses
Small Projects (1)
23 Ga Pin Nailer...Perfect
I bought this about 8 months ago, and have had time to use this tool. First, the size, balance, and ease of operation are excellent. It is extremely easy to load and unload the pin nails. Adjusting the depth with the knob on the front IS A MUST, and it has this. I have read a lot of reviews that complained about the setting of the pins, and I have not encountered any of those problems. There is minimal marring on the wood surface when setting them. I have noticed some marks around the nail on white pine, but have not had visible marks on any hardwoods.

GET IT if you need this type of nailer!!
October 3, 2019
Originally posted at
Would you recommend this product?
Easy To Use
Ergonomic Design
Best Uses
Small Projects
This is just an average pinner. Performed below my expectations.
It is light weight and small. I have not been impressed with the pins. It is advertised it will shoot through 2 inch oak. I have been pinning 3/4 inch birch and the pins will follow the grain and come out the side of the board. They don't pull out so you have a piece of the pin sticking out when it breaks off.
August 8, 2019
1 year ago
Describe Yourself:
Avid Do-it-Yourselfer
Excellent Pin Nailer
I bought this pin nailer a couple months ago and have used it numerous times. This is a quality pin nailer and I am very happy with the purchase.
March 19, 2019
Originally posted at
Very compact and great tool to have!
This Dewalt 23 GA Pin Nail Gun include hard case storage, and very handy for projects like molding base, crown, and furniture, my daughter love her new dresser. I would definitely recommend this to someone, no doubt Dewalt has never let me down!
This review was collected as part of a promotion
January 12, 2019
Originally posted at
Very lightweight
I really love this tool works great very lightweight which is always a plus on a job site
This review was collected as part of a promotion
January 9, 2019
Originally posted at
Dewalt 23 Ga. Pin nailer Mod. No. DWFP 2350K
I had plans to build a 4' by 8' bookcase that a good nailer would be beneficial in the construction of the bookcase. The top, bottom,sides and shelves were 1/2 inch sanded Birch plywood with 3/4 inch by 1 1/2 inch fir strips to cap the edges of the plywood. The fir strips were intended to provide strength to the plywood to prevent sagging or warping and cover the edges of the plywood. This nailer was carefully engineered to provide the cleanest and finished result of any nailer I have ever used. This Pin Nailer has a secondary trigger that when depressed allows the Primary trigger to dispatch at will. Most brad nailers require placing the tip of of the nailer on the wood and depressing the tip into the wood, which, leaves an indentation in the wood and then wood filler for a smooth finish, but, a blotchy finish. With this pin nailer , lightly set the tip on the wood and pull the primary trigger!!! Due to the small diameter of the pin nail (26Ga., the result is a tiny hole that to the eye of the beholder,wood filler might be optional.
Use some scrap wood to set the countersink depth of the nail. If the nail doesn't countersink into the wood, it maybe a challenge to remove the protruding nail and redo the nail. It will refuse to pull out!!! That is what it is supposed to do!!
This Dewalt Pin Nailer is a fine tool and is designed to give a clean and finished product. Not something that has to be repaired when your finished.
This review was collected as part of a promotion
January 9, 2019
Originally posted at
Great nailer for natural finishes
This is a great nailer for natural or stained wood projects. It has an easy adjust depth setting as well as an easy release for jams, that I have not had to use yet after 600+ nails. It uses 5/8 to 2 inch pin nails, I was able to get it to shoot 1/2 inch nails with no issues but I don’t recommend doing it often. The 23G nails do minimal damage to the wood so minimal filler if any will be needed. There are no nail heads so keep in mind your application, you may need to angle your nails more often.
The one thing that was a little off putting to me was the trigger safety, I’m more accustomed to the bump safety.
This is a solid nailer and highly recommend this to anyone doing natural wood finishes.
This review was collected as part of a promotion
January 4, 2019
Originally posted at
Great light weight pinner
The features I especially liked about this pinner was its light weight, adjustable depth setting and low nail lockout. The oil free feature will help prevent stains on my projects. I was able to sink 2”pins into solid birch with this pinner. I liked the belt hook. It also worked great putting in small molding. I feel it’s a bargain at $150. Other pinners without these features go for over $200. I would highly recommend this for any woodworker or carpenter.
This review was collected as part of a promotion
December 31, 2018
Originally posted at
No jams in 100 pins
I put 100 pins thru this gun and not a single jam.
This review was collected as part of a promotion
December 27, 2018
Originally posted at
DeWalt 23 gauge pin nailer
DeWalt 23 gauge brad nailer DWFP235OK

I have owned this headless pin/brad nailer a relatively short time and use it for commercial work. The tool is light weight at a little over 2Lbs, compact and has a natural feel to it including the secondary safety trigger. A good design and works great in tight spots. A feature is the jam release system giving full access to the jam area and easy removal of the defective brad without tools. Fortunately I have yet to experience a jam so I have not used the feature as yet other than opening it all up examining it. It looks very easy to do. The brad length range is 5/8ths to 2 inches which covers everything I use a 23 gauge nailer for. The 23 gauge load strips have 100 brads per load which is the max load for the magazine. The depth setting adjustment is easy to use and no tool is required. Using 1” staples, there is no problem with hard oak when the depth adjustment is set properly. A feature of the 23 gauge headless pins is that on a too-be painted surface with the depth correctly set, there is no real need to fill holes. Paint with color will do that just fine in most cases. Using the 23 gauge pins you run a very small chance of splitting wood when working close to edges. There is a neat warning function lock-out when the magazine is down to 8 or so brads and a small lever just above the main trigger that allows you to fire off the last few staples. There is also a small window in the magazine near the tip to check on remaining stack of brads in the strip. My son is a lefty and he uses it frequently and easily changed the belt hook over to the opposite side. A neat idea is they included a spare no-mar tip in a protected spot in the trigger guard area. The tool comes with a well built and durable blow molded carrying case with real metal snap latches and not plastic. There is space available in the case for brads and other misc. things one might keep with the tool. Overall a really nice rugged natural-feel tool and I would highly recommend it.
This review was collected as part of a promotion
December 26, 2018
Originally posted at

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!