GearWrench 85998 9-Piece GearBox 12 Point XL SAE Double Box Ratcheting Wrench SetGearWrench Model: kdtn85998
Product Features & specs :
GearWrench 85998 9-Piece GearBox 12 Point XL SAE Double Box Ratcheting Wrench Set
GearWrench 85998 9-piece XL Gear Box Double Box End SAE ratcheting wrench set consists of (1) of each 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in. and 3/4 in. XL gear box ratcheting wrenches. Ratcheting box end need as little as 5 Degrees to move the fastener as opposed to 30 Degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GearWrench's Off-Corner Loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life. Comes with a blow molded carrying case that can be hung on a wall or keep your wrenches organized in your tool box or rollaway.
72-Tooth ratcheting box end needs a minimal 5 Degrees to move fasteners vs. 30 Degrees for standard wrenches
Off-corner loading design on box end provides better grip and reduces fastener rounding
Size conveniently stamped on both ends of the beam for quick identification
0 Degrees offset on non-ratcheting end for breaking loose stubborn fasteners
Manufactured from alloy steel for better strength and longer tool life
Bright, full polish chrome finish easily wipes clean and resists corrosion
Included tray for storage and organization
5/16 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85950
11/32 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85951
3/8 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85952
7/16 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85954
1/2 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85956
9/16 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85958
5/8 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85960
11/16 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85962
3/4 in. GearBox 12 Pt XL SAE Double Box Ratcheting Wrench - 85964
Number of Tools
No. of Tools
Full Polish Chrome
Q & A :
Apex Tool Group, LLC
1000 Lufkin Road
Apex, NC 27539
GearWrench® hand tools are warranted for Life to be free of defects in material and workmanship. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered by this Warranty.
GearWrench - Consumer Tools
If any GearWrench Hand Tool purchased at a retailer, when used for its intended purpose, fails to give you complete satisfaction, please return it to the retailer location where purchased, or contact Apex Tool Group Consumer Division at (888)-757-1812 for free replacement or return.
GearWrench - Professional Tools
If use of any GearWrench Hand Tool® when used for its intended purpose, fails to give complete satisfaction, return it to your GearWrench Distributor or contact Apex Tool Group Professional Division at (800)-688-8949, and it will be repaired or replaced free of charge.
*Except Torque Products
*GearWrench Torque Products are warranted to (1) be free of defects in material and workmanship for one year and (2) meet out of the box calibration accuracy standards as stated in the product literature. Accuracy standards for calibration are warranted for 90 days from date of purchase. Products for which Warranty Repair is requested should be returned, at Buyer’s cost, for evaluation to:
Warranty Service & Authorized Repair:
Electronic Torque Wrenches
Apex Torque Repair
3000 West Kingsley Road
Garland, TX 75041
All other Torque Products:
Angle Repair & Calibration Service, Inc.
175 Angle Drive
Beckley, West Virginia 25801
GearWrench Torque Products are precision instruments that contain moving parts. These components are subject to normal wear through use and replacement thereof is the responsibility of Buyer. Torque Products should be routinely checked for calibration at an Authorized Repair Center using GearWrench repair parts.