Makita GFD01D 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Drill Driver Kit (2.5 Ah)Makita Model: mktngfd01d
FREE Makita 40V Max XGT 4 Ah Battery when you order this item! A $219 value! See Details
Last 3 In Stock
Product Features & specs :
Makita GFD01D 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Drill Driver Kit (2.5 Ah)
The 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Drill Driver Kit (2.5 Ah) (GFD01D) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. It's powered by a Makita-built brushless motor that delivers 1250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makita's 18V LXT Cordless 1/2 in. Hammer Driver-Drill (XPH07), with two speed settings (0-650 and 0-2600).
An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop.
The GFD01D is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V Max Lithium-Ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition.
OUTPOWER: Makita-built brushless motor delivers 1250 in.lbs. of Max Torque; out powers similar models in heavy load applications
OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions
Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2600 RPM)
Compact length at only 7-1/8 in.; ideal for working in tight spaces
Ultra-smooth variable speed trigger provides optimum control
Reinforced gear housing engineered for Maximum job site durability
All-metal chuck for increased job site durability
The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Drill Driver - GFD01Z
40V Max XGT 2.5 Ah Lithium-Ion Battery - BL4025
40V Max XGT Rapid Optimum Charger - DC40RA
(1) Side Handle
Electric - Cordless
Battery 2 Amp Hour
Variable Speed Trigger
No-Load Speed (RPM)
650 / 2600
650 / 2600
Battery Amp Hour
Q & A :
Makita Standard WarrantyThe Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.
Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool