Makita GPH01D 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Hammer Drill Driver Kit (2.5 Ah)Makita Model: mktngph01d
Last 3 In Stock
Product Features & specs :
Makita GPH01D 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Hammer Drill Driver Kit (2.5 Ah)
The 40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Hammer Drill Driver Kit (2.5 Ah) (GPH01D) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry.
The GPH01D is powered by a Makita-built brushless motor that delivers 1250 in-lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makita's 18V LXT Cordless 1/2 in. Hammer Driver-Drill (XPH07), with two speed settings (0-650 and 0-2600 RPM and 0-9750 and 0-39000 BPM). An ultra-smooth variable speed trigger provides optimum control.
An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop.
The GPH01D is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V Max Lithium-Ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition.
OUTPOWER: Makita-built brushless motor delivers 1250 in-lbs. of Max Torque; out powers similar models in heavy-load applications
OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions
Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2600 RPM) (0-9750 & 0-39000 BPM)
Compact length at only 7-1/8 in.; ideal for working in tight spaces
Ultra-smooth variable speed trigger provides optimum control
Reinforced gear housing engineered for Maximum job site durability
All-metal chuck for increased job site durability
Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
40V Max XGT Brushless Lithium-Ion 1/2 in. Cordless Hammer Drill Driver - GPH01Z
(2) 40V Max XGT 2.5 Ah Lithium-Ion Batteries - BL4025
40V Max XGT Rapid Optimum Charger - DC40RA
Battery 2 Amp Hour
Variable Speed Trigger
No-Load Speed (BPM)
9750 / 39000
No-Load Speed (RPM)
650 / 2600
Battery Amp Hour
Q & A :
Makita Standard WarrantyThe Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.
Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool