SawStop ICS53480-36 480V 3-Phase 5 HP Industrial Cabinet Saw with 36 in. Industrial T-Glide Fence SystemSawStop Model: sspnics53480-36
Product Features & specs :
SawStop ICS53480-36 480V 3-Phase 5 HP Industrial Cabinet Saw with 36 in. Industrial T-Glide Fence System
The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10 in. cabinet saw available. The 5HP, 3ph, 480V configuration with a 36 in. Industrial T-Glide Fence Assembly offers the durability, versatility, and the peace of mind only SawStop's patented safety system can provide.
69-1/4 in. W, 36-1/2 in. D, 34 in. H
Durable craftsmanship and thoughtful details combine for consistent, reliable performance in the most demanding industrial environments
SawStop Safety System stops on contact with skin
36 in. Industrial T-Glide Fence System provides smooth operation, precision measurement, and sure lockdown without deflection
480V 3-Phase 5 HP Industrial Cabinet Saw with 36 in. Industrial T-Glide Fence System - ICS53480-36
(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Dust Collection Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10 in. Blade
(1) Standard Lockdown Insert
(1) Standard Brake Cartridge
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge
(1) Owner’s Manual
Dado Blade Width (Max.)
Rip Capacity (Right)
Dado Blade Diameter (Max.)
Table Width (w/ Wings)
Table Width (w/ Extension)
Depth of Cut (45 Degrees)
Blade Tilt Range
0 - 45 Degrees
No-Load Speed (RPM)
Depth of Cut (90 Degrees)
Max. Rip Capacity (Right)
Max. Rip Capacity (Left)
Rip Capacity (Left)
Q & A :
SawStop warrants to the original retail purchaser of a new Professional Cabinet Saw accompanying this manual and purchased from an authorized SawStop distributor that the saw and any accessories purchased with the saw will be free from defects in material and workmanship for TWO YEARS from the date of purchase.
SawStop warrants to the original retail purchaser of a refurbished, demonstration or floor model Professional Cabinet Saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for ONE YEAR from the date of purchase.
This warranty does not apply to defects arising from misuse, abuse, negligence, accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance. This warranty is void if the saw or any portion of the saw is modified without the prior written permission of SawStop, LLC, or if the saw is located or has been used outside of the country of residence of the authorized SawStop distributor from whom the saw was purchased.
Please contact SawStop to take advantage of this warranty. If SawStop determines the saw or an accessory is defective in material or workmanship, and not due to misuse, abuse, negligence, accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance, then SawStop will, at its expense and upon proof of purchase, send replacement parts to the original retail purchaser necessary to cure the defect. Alternatively, SawStop will repair the saw or accessory provided the saw or accessory is returned to SawStop, shipping prepaid, with proof of purchase and within the warranty period.
SawStop disclaims any and all other express or implied warranties, including merchantability and fitness for a particular purpose. SawStop shall not be liable for death, injuries to persons or property, or incidental, consequential, contingent or special damages arising from the use of the saw.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
To register your saw, please visit - www.sawstop.com/support/product-registrationNo Warranty of Safety
It is important to understand that SawStop saws do not prevent injuries. They work to minimize the severity of injuries. In fact, an injury must occur before the SawStop® safety system reacts. The severity of the injury will depend on the speed at which a person contacts the spinning blade. You may incur a serious injury on a SawStop® saw. If you decide to use the saw in Bypass Mode, the safety system will be disabled and it will not activate in the event you contact the spinning blade.