Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand

Model: bshn4100-10
        (15) Write A Review
$569.99
free shipping
This item qualifies for
FREE SHIPPING
free shipping

alert warning icon

  • In Stock

OR PAY WITH

Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand Model: bshn4100-10
price for vip customer
$569.99

OR PAY WITH

Product Features & specs :

Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand

Details
The Bosch 4100-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed to manage the intensity of motor start-up and minimize the possibility of tripping a circuit breaker.. It includes Constant Response circuitry to help maintain speed under load, and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use, with the fence able to easily glide along the rail for one-handed operation. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System is the first modular table saw blade guard, featuring a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 29 In. x 21-1/2 In. square tabletop with a 25 In. rip capacity for ripping 4 Ft. wide sheets goods in half.
Features:
  • Powerful 10 in. Worksite table saw – features 15-Amp saw delivers 4.0 max HP and 3, 650 RPM, for the power required for ripping rip-cutting and cross-cutting in of fine- and rough-carpentry materials
  • Large cast aluminum top – provides increased work space and material support with a 25 in. Ripping capacity to cover all typical jobsite rip-cutting widths
  • Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
  • Smart guard system – riving knife and Anti-Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
  • Soft-start circuitry – manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
What’s Included:
  • (1) 4100-10 10 In. Worksite Table Saw
  • (1) Gravity-Rise Wheeled Table Saw Stand
  • (1) Smart Guard System - Barrier-Guard Device and Anti-Kickback Pawls
  • (1) 10 In. Carbide-Tipped Blade
  • (1) SquareLock Rip Fence
  • (1) Miter Gauge
  • (1) Smart Guard System
  • (1) Push Stick
  • (1) Throat Plate Insert
  • (1) Multi-Function Blade Wrench
  • (1) Adjustment Wrench
Length
29 in.
Width
32 in.
Height
13.25 in.
Weight
92 lbs.
Amperage
15
Arbor Size
5/8 in
Blade Diameter
10 in
Blade Guard System
Yes
Blade Tilt
Left
Blade Tilt Range
-2 to 47 degrees
Bluetooth Compatibility
No
CSA Safety
No
Case Included
No
Dado Blade Diameter (Max.)
8 in
Dado Blade Width (Max.)
0.81 in
Depth of Cut (45 Degrees)
2-1/2 in
Depth of Cut (90 Degrees)
3-1/8 in
Dust Collection Type
Dust Bag
ETL Safety
No
Extension Type
Telescoping
Horsepower
4
Motor Type
Brushed
No-Load Speed (RPM)
3650
Power Source
Corded
Rip Capacity (Left)
8-1/2 in
Rip Capacity (Right)
25 in
Table Depth
21-1/2 in
Table Type
Aluminum
Table Width
29 in
Table Width (w/ Extension)
32 in
UL Safety
Yes
Voltage
120V
Wifi compatibility
No

Additional Buying Options :

Model: BSHN4100-10

Key specs

  • Weight: 92 lbs.
  • Amperage: 15
  • Depth of Cut (90 Degrees): 3-1/8 in
  • Rip Capacity (Right): 25 in
  • Table Depth: 21-1/2 in
$569.99

OR PAY WITH

Key specs

  • Weight: 92 lbs.
  • Amperage: 15
  • Depth of Cut (90 Degrees): 3-1/8 in
  • Rip Capacity (Right): 25 in
  • Table Depth: 21-1/2 in

OR PAY WITH

OR PAY WITH

Model: BSHNGTS1031

Key specs

  • Weight: 52 lbs.
  • Amperage: 15
  • Depth of Cut (90 Degrees): 3-1/8 in
  • Rip Capacity (Right): 18 in
  • Table Depth: 22-1/2 in
$369.99

OR PAY WITH

Key specs

  • Weight: 52 lbs.
  • Amperage: 15
  • Depth of Cut (90 Degrees): 3-1/8 in
  • Rip Capacity (Right): 18 in
  • Table Depth: 22-1/2 in

OR PAY WITH

OR PAY WITH

Reviews :

4.3 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
1
1
0
2
Would you recommend this product?
Yes (5)
Pros
Easy To Use (5)
Powerful (5)
Ergonomic Design (3)
Value (3)
Cons
Heavy (1)
Best Uses
Home Repair (4)
Jobsite (4)
Large Projects (3)
Small Projects (3)
Excellent tool for small garage workshop
I decided to upgrade my table saw from a 25+ year old smaller table saw. Bosch's reputation for quality tools, a great price on Amazon that includes the stand was exactly what I was looking for. Easy set up, accurate out of the box and verstile for my needs.
November 21, 2019
Originally posted at
It's never as straightforward as instructions indi
Purchased 4100 Table Saw just before Veteran's day 2019 at Lowe's. GTA47W Stand assembly required approximately 2 hours.
Everything was still in factory alignment. Attaching the "Smart Guard System" was a major pain. However, the customer service assistance was excellent.
November 14, 2019
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Value
Best Uses
Home Repair
Jobsite
Great job site saw
Easy to move around, quick to open or close, accurate, packs well in the trailer.
September 7, 2019
Purchased
5 months ago
Describe Yourself:
Professional
Poor Design
I’ve had this saw about two years and just use it occasionally for home use in my shop. A few weeks back it began making a horrendous noise and smoke started coming out of the dust port. I shut it off and rolled it out of my shop.

Last night I tore the motor down to see what might be going on. What I found was pretty disappointing. The armature bearing had completely seized up in turn wiping out the motor housing, armature, and field. Of course it’s out of warranty so I’ll be spending at least $150 to replace the components. I can’t tell if the armature bearing had a seal or not, it almost appears as though it was just a shielded bearing which I can’t understand with the environment that the bearing resides in. Certainly if it was just shielded sawdust found its way in rather quickly and dried up the grease.

Pretty disappointed in this piece of Bosch equipment, in total honesty this saw hasn’t seen more than a couple hours max of runtime and that’s being generous. I tried to post pictures but it keeps throwing an error.
September 4, 2019
Originally posted at
GREAT TABLE SAW
Just got it on Labor Day from Lowe's. Love it, so far no problems. I'm new at this so not a lot of experience but so far so good
September 4, 2019
Originally posted at
Miter Gauge
I bought this saw a few years ago and from day 1 - I noticed the slop in the track for the miter gauge. It is impossible to cut a true line as the gauge slips to the right or left as it is pushed through the saw. It's hard for me to believe that Bosch would manufacture the table with a track wider than the arm of the miter gauge but that is what they did. I have been applying a "fix" with layers of metal tape of the sides of the tracks. That fix gives me a few hours of better performance. I cannot find a gauge that accurately fits the track. For rough construction work the problem is not particularly noticeable, but for any type of finish work - the problem is VERY noticeable. I wish I had purchased another saw/
July 27, 2019
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Value
Lightweight
Best Uses
Jobsite
I have used other table saws before but this one is very powerful it does not seem to loose power when cutting.As a contractor handling cutting material is very important.
July 21, 2019
Purchased
7 months ago
Describe Yourself:
Professional
Incredible Engineering and Capabilities
I was given this saw as a gift and have been extremely impressed by the level of detailed engineering put into the tool. It has performed flawlessly and so far I haven’t found something it can’t do.
July 1, 2019
Originally posted at
1 Year 3 Weeks - Dead
The gravity rise stand is very nice as well as the features this saw offers. 1 year and 3 weeks after purchase the rear bearing froze and melted the motor housing. I know two other people who totally abuse and neglect theirs and theirs is still going strong. I just don't get it - I took very good care of it. It's cleaned during and after every use, wipe and blow any saw dust away. I've always used dust collection but somehow the most important bearing goes out killing the machine. The cost of replacement parts are such that it makes more sense to buy new. I wish Bosch would make it right because this should have never happened so soon. I'm looking at other brands, but all my jigs are built for this machine. Just heart breaking to be saw-less with so many projects to do. I would still recommend to others, even though I must have gotten a lemon.
May 9, 2019
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Value
Best Uses
Frequent Use
Large Projects
Small Projects
Home Repair
Best saw on the market
This is a great saw. I have a another brand of saw that is also portable but its no comparison to this saw. the only thing is to put in down takes some practice but it is powerful enough to handle anything put thru it. I would recommend this saw to everyone.
March 29, 2019
Purchased
11 months ago
Describe Yourself:
Professional

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 7 answers
Difference between 4100-09 + 4100-10?
James S on Aug 7, 2018
Does it have a point to connect a 2 1/2" vacuum to collect the dust?
Andrew S on Mar 27, 2019
BEST ANSWER: Yes, model 4100-10 will have the options to add a dust extractor to the saw.
Does this unit have an extended fence similar to the Dewalt job-site unit?
A shopper on Dec 19, 2018
BEST ANSWER: We have the left side extension model BSHNTS1008. You can also contact Bosch directly and the agent will provide you with the information about the saw. The number to reach the technician is 1-877-267-2499.
table extension?
A shopper on Jan 4, 2020
BEST ANSWER: Model 4100-10 will not include a table extension. The saw does have an extension for the saw. The model number for the extension is TS1008, the link to view the extension is below:

https://www.cpooutlets.com/bosch-ts1008-left-side-support-extension-for-table-saw/bshnts1008.html
how do you order the Bosch 4100 table saw with the Bosch DC010 Digital Carriage Display?
Tim R on May 5, 2019
BEST ANSWER: The item has been discontinued with no replacements.