General International 10 in. 15A 2 HP Motor Table Saw with Stand

General International Model: TS4001

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
General International 10 in. 15A 2 HP Motor Table Saw with Stand General International Model: TS4001

Product Features & specs :

General International 10 in. 15A 2 HP Motor Table Saw with Stand

Details

General International 15A 2HP table saw is a woodworking tool consisting of a circular saw blade, mounted on an arbor, driven by an electric motor. The blade protrudes through the surface of a table, which provides support for the material (usually wood). In a modern table saw, the depth of the cut is varied by moving the blade up and down: the higher the blade protrudes above the table, the deeper the cut that is made in the material. This TS4001 features a 13 Amp high-torque motor with the power to cut pressure-treated lumber and hardwoods. It offers 2-7/8 inch depth of cut at 90 degrees, and 2-5/8 inch max cut height 45 degrees. On board storage provides easy access to the components and push stick when not in use.

Features:

  • 1500W, 120V 60Hz, , 5700 rpm, Amp: 15

  • Max Cutting height: at 90 degrees: 2-7/8 in., at 45 degrees: 2-5/8 in., Tilting range: 0 to 48 degrees left

  • Table dimensions: 26 in. x 17.5 in., Table height (on stand): 35-3/8 in.

  • Easy-access safety switch with removable security key, Cast aluminum work table, Includes: 10in.- 24 tooth TCT saw blade

  • Storage on the housing for push stick, blade wrench or spare blades, and power cord

  • Rip fence, Miter gauge, Push stick, Blade wrench, Sturdy steel stand, Transparent blade guard with riving knife and anti-kickback pawls

  • ETL Certified, 43 lbs

  • Cutting Angle: -2 to 47 degrees, .625 in. Arbor

  • <95 dBa

What’s Included:

  • 10 in. 15A 2 HP Motor Table Saw with Stand - TS4001

Power Source

Corded

Table Type

Aluminum

Amperage

15

Wifi compatibility

No

Blade Diameter

10 in

Bluetooth Compatibility

No

Table Width (w/ Extension)

35-3/8 in

Arbor Size

5/8 in

Depth of Cut (45 Degrees)

2-5/8 in

Blade Tilt Range

0 - 45 Degrees

No-Load Speed (RPM)

5700

Depth of Cut (90 Degrees)

2-7/8 in

Case Included

No

Table Width

17-1/2 in

Horsepower

2

Voltage

120V

Table Depth

26 in

Warranty Term

2 Year

Reviews :

Q & A :