Bosch CM10GD 15 Amp 10 in. Dual-Bevel Glide Miter SawBosch Model: bshncm10gd
$75 off $300 on Select Bosch Products! See Details
$20 off $100 on Select Bosch Products See Details
Product Features & specs :
Bosch CM10GD 15 Amp 10 in. Dual-Bevel Glide Miter Saw
The Bosch CM10GD 10 In. Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 In. less front-to-back workspace than conventional slide miter saws. This enables users to work productively in hallways and other tight quarters. The saw's 15-amp motor delivers 4,800 no-load rpm with outstanding cut capacity – 12 In. horizontal cut capacity, 5-1/2 In. vertical baseboard cut capacity against the fence and a 6 In. crown cut capacity nested against the fence (45° spring).
Axial-Glide system allows wider cross-cuts - The innovative Bosch Axial-Glide System provides durable precision in a compact workspace. Replacing the sliding rail system with a hinged or articulated glide arm system saves up to 10 In. of working room over conventional slide miter saws, while offering enhanced alignment and a smooth glide for the life of the unit. The CM10GD provides smooth cuts while allowing complete control over the saw's cutting motion.
Flexibility and ease of use - The all-metal bevel lock lever and range selector was designed to be upfront on this unit, to enable fast and easy bevel settings without reaching around behind the saw. The tall 4-1/4 In. sliding fences also support quick bevel setups, professional level precision and increased crown-molding capacity.
Articulated hinge arms reduce the saw’s front-to-back footprint by up to 10 in. compared to slide saws with similar capacities
Axial-Glide System offers more durable precision than side saw rail systems
Powerful 15 Amp motor delivers 4800 no-load RPM for professional cutting capacity
Wide cutting capacities includes 12 in. horizontal cut capacity, 5-1/2 in. vertical baseboard cut capacity against the fence and a 6 in. crown cut capacity nested against the fence (45 Degrees spring)
Bevel lock lever and range selector are located upfront for quick, easy settings without having to reach around behind saw
Tall sliding 4-1/4 in. fences for easy bevel set ups and increased crown and base molding capacity
Wide 47 Degrees left/47 Degrees right bevel capacity with detents at 0 Degree, 33.9 Degrees, 45 Degrees left/right for easy setting of the most-common bevel angles
Adjustable miter detents designed to be accurate and durable, and includes detents at 0 Degree, 15 Degrees, 31.6 Degrees, 22.5 Degrees, 45 Degrees, 60 Degrees
Push-button miter detent override provides easy-to-access thumb actuated control right up front for fine miter angle adjustment
Large easy-to-read uniform bevel and stainless steel miter scales in degrees plus roof pitch angles for more convenient cut setup
Category-best 90% dust collection optimized for cutting 2X material with a vacuum
Ergonomic ambidextrous trigger handle with soft grip provides comfort for all-day use and a large form-fitting ergonomic handle
15 Amp 10 in. Dual-Bevel Glide Miter Saw - CMD10GD
(1) Work Clamp
(1) Dust Bag
(1) Vacuum adapter/elbow
Blade Speed (RPM)
Bevel Angle (Right)
Cutting Capacity (45 Miter Left/0 Bevel)
3-1/8 in x 8 in
Miter Angle (Left)
Cutting Capacity (0 Miter/0 Bevel)
5-1/2 in x 12 in
Cutting Capacity (45 Miter Left/45 Bevel Right)
1 in x 8 in
Cut Guidance System
Cutting Capacity (45 Miter Right/45 Bevel Right)
1 in x 8 in
No-Load Speed (RPM)
Cutting Capacity (0 Miter/45 Bevel Right)
1-1/2 in x 12 in
Bevel Angle (Left)
Cutting Capacity (0 Miter/45 Bevel Left)
1-1/2 in x 12 in
Keyless/keyed Blade Change
Positive Miter Detents
Miter Angle (Right)
Dust Collection Type
Cutting Capacity (45 Miter Right/45 Bevel Left)
1-1/2 in x 8 in
Q & A :
All Factory Reconditioned Tools are covered under the same terms and conditions as the new tool warranty, for one (1) year from date of purchase except as noted below:
- Cordless Tool batteries are covered for one (1) year from date of purchase
- ProVantage Protection Plan is not applicable to reconditioned tools
- One Year Service Protection Plan is not applicable to reconditioned tools
- 30-Day Money Back Refund or Replacement is not applicable to reconditioned tools
- Dremel reconditioned tools are covered for 2 years from date of purchase
- Tripods and Rods are covered for 90 Days from date of purchase
- Reconditioned Tools/Kits may not contain the identical accessories, cases and kit contents of the New Tool version.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL BOSCH DEALER OR IMPORTER.