Fein RS 12-70 E-PS Pipe Polisher Kit

Fein Model: fennrs12-70e-ps
ratings        (0) Write The First Review
free shipping
This item qualifies for
free shipping
This item ships directly from manufacturer
alert warning icon


CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Fein RS 12-70 E-PS Pipe Polisher Kit Fein Model: fennrs12-70e-ps
price for vip customer


Product Features & specs :

Fein RS 12-70 E-PS Pipe Polisher Kit

Competency in grinding, finishing and polishing applications.
Two things that count for processing stainless steel surfaces are performance and speed. The FEIN high-power motor provides the pipe sander RS 12-70 E with a working speed of up to 72 ft./s. The abrasive performance is extremely high with top results - from rough sanding to mirror polishing. Stainless steel pipes with diameters from about 5/16 in. to 3-1/8 in. can be finished; especially hand rails and rods. Only two sanding passes are necessary for sanding or polishing pipes because the belt envelops 180 degrees of the pipe. Even hand rails that are already mounted can be finished if they are at least 2 in. away from the wall. And ''opening'' of the belt is not necessary for closed pipe systems. All these benefits can be quickly reaped during routine labor.
  • Pipe polisher with accessory selection covering coarse grinding to mirror finish
  • Efficient grinding of weld seams due to ideal cutting speed of the grinding belts
  • Variable speed for grinding, satin finishing and mirror-finish polishing of previously-installed hand rails
  • Flexible grinding belts conform themselves perfectly, even on sharp pipe curves, and consequently produce seamless surfaces
  • 360 degrees circumferential grinding in only two steps
  • Optional guide roller for limited wall clearance
  • Self-start lock
  • Dustproof ball bearing
  • Automatic switch-off carbon brushes
  • Wide range of accessories
What’s Included:
  • Pipe Polisher Kit - RS 12-70 E-PS
  • (10) 32-1/16 in. x 13/16 in. 120-Grit Sanding Belts
  • (10) 32-1/16 in. x 13/16 in. 180-Grit Sanding Belts
  • (10) 32-1/16 in. x 1-9/16 in. 120-Grit Sanding Belts
  • (10) 32-1/16 in. x 1-9/16 in. 180-Grit Sanding Belts
  • (5) 32-5/16 in. x 13/16 in. 280-Grit Fleece Belts
  • Metal Tool Case
Power Source
Speed Type
Variable Speed
Bluetooth Compatibility
Motor Type
No-Load Speed (RPM)
Wifi compatibility
Pad Diameter
1/8 in / 3-1/8 in
Switch Type
Lock-On Slide
Case Included
8.3 lbs.
Warranty Term
3 Year

Reviews :

There are no reviews for this item. Write Review

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!


Warranty Information

FEIN One Year Standard Warranty

Every FEIN power tool is carefully inspected, tested, and is subject to FEIN Quality Assurance's stringent controls. FEIN grants a manufacturer guarantee for precise construction and faultless material on its power tools for the duration of (1) one year - appropriately as of purchase date.

3-year FEIN PLUS guarantee:

3 year guarantee This guarantee period is extended to 3 years for all FEIN power tools purchased after 1/1/2005 (Except FEIN High-Frequency Power Tools, FEIN Accu Tec Screw Guns, FEIN Balancer, FEIN Pipe Processing Tools, FEIN Compressed Air Tools, FEIN Battery Packs and Battery Chargers) if the purchaser has registered within 6 weeks of the purchase date. Registration has to be done by the customer himself on the Internet. Register online here. The proof of registration, which has to be printed out immediately, is valid as the confirmation along with the original sales receipt, which shows the purchase date. Registration can be done only if the customer accepts the storage of the queried information.

In case of a material or construction fault, a free repair will be done or in case a repair is impossible the free replacement of the device with a new one (or possibly a follow-up model).

This warranty does not cover damages that are the result of improper use such as nonobservance of the instructions, overload, operation with wrong voltages, wrong type of electricity, or unsuited accessories, as well as external influence such as dropping or striking. Not covered by the warrantee are furthermore wear from operational use under normal conditions.

Services covered by this guarantee declaration are provided solely by FEIN and by companies explicitly authorized for this by FEIN.

In case of assertion of claims from this warranty the power tool concerned has to be completely submitted or sent in along with the original sales receipt (that shows the purchase date and the product name). Partially or completely disassembled power tools cannot be accepted.

Contractual or legal warranty claims towards the retailer remain untouched by this manufacturer guarantee.

Please note that the 3-year FEIN PLUS guarantee is valid only in certain countries. Please see www.fein.de/warranty for a list of these countries.