JET EVS-1440 3 HP Variable Speed Lathe with Newall DP700 DRO

JET Model: JT9-311448

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to chemicals including Lead, a chemical known to the State of California to cause Cancer and Birth Defect/Reproductive Harm and Titanium Dioxide, a chemical known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.
JET EVS-1440 3 HP Variable Speed Lathe with Newall DP700 DRO JET Model: JT9-311448

Product Features & specs :

JET JT9-311448 EVS-1440 3 HP Variable Speed Lathe with Newall DP700 DRO

Details

The EVS-1440B is engineered to maximize your shop's output. The D1-4 spindle is precision ground for accuracy and supported by Class 7 tapered roller bearings capable of a run out maximum of .0004 in. The 2-speed gearbox allows operators to easily work at low speeds from 40 - 365 RPM and at high speeds from 220 to 2,000 RPM.

Features:

  • V-way bed design is induction hardened and ground

  • Splined, not keyed, shafts are utilized

  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings

  • Independent lead screw and feed rod

  • Adjustable gibs are incorporated in the carriage and slide ways

  • Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004 in.

  • Meehanite castings retain their tolerance and remain rigid through many years of machining

  • Safety on/off switch

  • Emergency stop within easy reach of the operator

  • Electronic chuck key docking station

What’s Included:

  • EVS-1440 3 HP Variable Speed Lathe with Newall DP700 DRO - 311448

Power Source

Corded

Range of Inch Threads (TPI)

2 - 56

Spindle Bore Diameter

1-1/2 in

Bed Width

7.48 in

Swing Range (Cross Slide)

9-1/16 in

No. of Inch Threads

34

Bluetooth Compatibility

No

Cross Slide Travel

7 in

Motor Type

Whisper Wind

Spindle Speed Range (RPM)

40 - 2000

Compound Slide Travel

3-1/2 in

Range of Metric Threads

0.5-12

Steady Rest Capacity

23/100 in - 61/100 in

No. of Metric Threads

34

Tool Size

3/4 x 3/4 in

Gap Length

9-1/2 in

Motor Phase

3

Range of Longitudinal Feed Rates (IPR)

0.0016 - 0.046 in

Spindle Taper (Tailstock)

MT-3

Horsepower

3

Voltage

230V

Spindle Mount Taper

Yes

Spindle Travel (Tailstock)

6-1/8 in

No. of Longitudinal Feed Rates

25

No. of Cross Feed Rates

25

Swing Range (Bed)

14 in

Spindle Mount

Yes

Length

76 in.

Width

30 in.

Height

61 in.

Weight

1584 lbs.

Warranty Term

2 Year

Reviews :

Q & A :

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


2-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited two-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.