Makita 18V LXT Brushless Sub-Compact Lithium-Ion 1/2 in. Cordless Hammer Drill-Driver Kit with 2 Batteries (2 Ah)

Makita Model: XPH15RB

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Makita 18V LXT Brushless Sub-Compact Lithium-Ion 1/2 in. Cordless Hammer Drill-Driver Kit with 2 Batteries (2 Ah) Makita Model: XPH15RB

Product Features & specs :

Makita XPH15RB 18V LXT Brushless Sub-Compact Lithium-Ion 1/2 in. Cordless Hammer Drill-Driver Kit with 2 Batteries (2 Ah)

Details

The 18V LXT Sub-Compact Brushless Hammer Driver-Drill Kit (XPH15RB) is an ultra-compact drilling and driving solution with significantly less weight. The 18V Sub-Compact Hammer Driver-Drill offers the size and weight of lower voltage tools, but with the performance, power, and compatibility of 18-Volt. For drilling holes in concrete or masonry, set the tool to hammer mode which applies a percussive motion during drilling (for use with a masonry bit, sold separately). The XPH15RB has an efficient brushless motor with two speed settings and dual L.E.D. lights to illuminate the work area. At only 6-1/2 in. long, it is an ultra-compact drilling and driving solution with superior comfort and handling.

It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Features:

  • Compact and ergonomic design at only 6-1/2 in. long

  • Weighs only 3.1 lbs. with battery for reduced operator fatigue

  • Ideal for working in tight spaces

  • Mechanical variable 2-speed transmission (0-500 and 0-1700 RPM) (0-7500 and 0-25500 BPM) for a wide range of drilling, fastening and hammer drilling applications

  • Engineered with a metal jampot design for increased durability

  • Dual L.E.D. lights illuminate the work area

  • Ergonomically designed handle with rubberized soft grip provides increased comfort

  • Makita-built Brushless Motor delivers 350 in.-lbs. of Max Torque

  • The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life

  • Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge

What’s Included:

  • 18V LXT Brushless Sub-Compact Lithium-Ion 1/2 in. Cordless Hammer Drill-Driver - XPH15ZB

  • (2) 18V LXT Compact 2.0 Ah Lithium-Ion Batteries - BL1820B

  • 18V LXT Lithium-Ion Rapid Optimum Charger - DC18RC

  • Tool Bag

Maximum Torque

350 in-lbs

Power Source

Cordless

UL Safety

Yes

Power Type

Electric - Cordless

Wifi compatibility

No

Batteries Included

2

Battery Type

Li-Ion

Chuck Size

1/2 in

Battery 2 Amp Hour

2 Ah

Bluetooth Compatibility

No

Variable Speed Trigger

Yes

No-Load Speed (BPM)

0 - 7500 / 0 - 25500

Motor Type

Brushless

Battery Warranty

3 Year

Charger Included

Yes

No-Load Speed (RPM)

0 - 500 / 0 - 1700

CSA Safety

No

Case Included

Yes

Case Type

Tool Bag

Battery Amp Hour

2 Ah

Voltage

18V

Handle Type

Ergonomic

Chuck Type

Keyless

ETL Safety

No

Battery System

LXT

Series

Sub-Compact

Length

6.5 in.

Weight

3.1 lbs.

Warranty Term

3 Year

Reviews :

Q & A :

Warranty:

Warranty Information

Makita Standard Warranty

The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.