Makita 18V LXT Brushless 4 Speed Lithium-Ion 3/8 in. Cordless Square Drive Impact Wrench with Friction Ring Anvil and 2 Batteries (5 Ah)
Makita Model: XWT16TEnter your email address and we'll let you know when it's available
OUT OF STOCK
CA Residents
Prop 65 Warning
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Product Features & specs :
Makita XWT16T 18V LXT Brushless 4 Speed Lithium-Ion 3/8 in. Cordless Square Drive Impact Wrench with Friction Ring Anvil and 2 Batteries (5 Ah)
Details
The 18V LXT Brushless Cordless 4 Speed 3/8 in. Square Drive Impact Wrench with Friction Ring Anvil Kit (XWT16T) provides improved fastening control. It is ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 220 ft-lbs. of Fastening Torque and 370 ft-lbs. of Nut-Busting Torque. Precise fastening control is achieved through the 4 Speed power selection switch, which accounts for a wide range of applications. (3) Forward and (3) Reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. The XWT16T features Makita's Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is a communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging, and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
Features:
-
Makita-built Brushless Motor delivers 220 ft-lbs. of Fastening Torque and 370 ft-lbs. of Nut-Busting Torque
-
Compact and ergonomic design at only 5-1/2 in. Long
-
4 Speed power selection switch (0 - 1000 / 0 - 1800 / 0 - 2600 / 0 - 3200 RPM and 0 - 1800 / 0 - 2600 / 0 - 3400 / 0 - 4000 IPM) for precise fastening control in a wide range of applications
-
(3) Forward and (3) Reverse Auto-Stop modes for increased efficiency
-
Full speed mode function reduces trigger pull to reach full speed
-
Efficient BL Brushless Motor is electronically controlled to optimize battery energy use for up to 50% Longer run time per charge
-
The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
Extreme Protection Technology (XPT) is engineered to provide improved dust and water resistance for operation in harsh conditions
-
Built-in L.E.D. light with an independent on/off switch illuminates the work area
-
Weighs only 4 lbs. with battery for reduced operator fatigue
What’s Included:
-
18V LXT 4-Speed 3/8" Impact Wrench w/ Friction Ring Anvil - XWT16Z
-
(2) 18V LXT 5 Ah Lithium-Ion Batteries BL1850B
-
18V LXT Lithium-Ion Rapid Optimum Charger - DC18RC
-
Tool Bag
Maximum Torque
370 ft-lbs
Power Source
Cordless
Breakaway Torque
370 ft-lbs
UL Safety
Yes
Wifi compatibility
No
Batteries Included
2
Battery Type
Li-Ion
Speed Settings
4
Battery 2 Amp Hour
5 Ah
Bluetooth Compatibility
No
Variable Speed Trigger
Yes
Motor Type
Brushless
Battery Warranty
3 Year
Charger Included
Yes
No-Load Speed (RPM)
0 - 3200
CSA Safety
No
Drive Size
3/8 in
Case Included
Yes
Case Type
Bag
No-Load Speed (IPM)
4000
Maximum Speed (RPM)
3200
Battery Amp Hour
5 Ah
Voltage
18V
Handle Type
Pistol
Speed
4
Drive Type
Square
ETL Safety
No
Battery System
LXT
Length
5.5 in.
Weight
4 lbs.
Warranty Term
3 Year
Reviews :
Q & A :
Warranty:
Warranty Information
Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
Makita Standard Warranty
The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool