Makita 18V LXT Brushless Lithium-Ion 1/2 in. Square Drive Cordless 4-Speed Mid-Torque Utility Impact Wrench with Detent Anvil (Tool Only)

Makita Model: XWT18XVZ

Enter your email address and we'll let you know when it's available

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Makita 18V LXT Brushless Lithium-Ion 1/2 in. Square Drive Cordless 4-Speed Mid-Torque Utility Impact Wrench with Detent Anvil (Tool Only) Makita Model: XWT18XVZ

Product Features & specs :

Makita 18V LXT Brushless Lithium-Ion 1/2 in. Square Drive Cordless 4-Speed Mid-Torque Utility Impact Wrench with Detent Anvil (Tool Only)

Details

The 18V LXT Brushless 4-Speed Mid-Torque 1/2 in. Square Drive Impact Wrench with Detent Anvil (XWT18XVZ) provides improved fastening control and is ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance.

It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 520 ft-lbs. of Fastening Torque and 740 ft-lbs. of Nut-Busting Torque.

Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency, and can be set to automatically stop or slow rotation to help prevent over-tightening or over-loosening. The full-speed mode function reduces the trigger pull to reach full speed. These precision settings can be quickly adjusted on the control panel at the base of the handle.

Features:

  • Makita-built brushless motor delivers 520 ft-lbs. of Fastening Torque and 740 ft-lbs. of Nut-Busting Torque

  • Compact and ergonomic design at only 6-11/16 in. long

  • 4-Speed power selection switch (0 - 500 / 0 - 1200 / 0 - 1900 / 0 - 2200 RPM and 0 - 1000 / 0 - 1700 / 0 - 2400 / 0 - 2700 IPM) for precise fastening control in a wide range of applications

  • 3 Forward and 3 reverse Auto-Stop modes for increased efficiency

  • Full speed mode function reduces trigger pull to reach full speed

  • Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge

  • The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application

  • Extreme Protection Technology (XPT) is engineered to provide improved dust and water resistance for operation in harsh conditions

  • Built-in L.E.D. light with an independent on/off switch illuminates the work area

  • Weighs only 6 lbs. with battery for reduced operator fatigue (battery not included)

What’s Included:

  • 18V LXT Li-Ion 1/2 in. Sq. Drive 4-Spd Mid-Torque Utility Impact Wrench w/Detent Anvil (Tool Only) - XWT18XVZ

  • Battery and Charger Sold Separately

Maximum Torque

520 ft-lbs

Power Source

Cordless

Breakaway Torque

520 ft-lbs

UL Safety

Yes

Wifi compatibility

No

Batteries Included

0

Battery Type

Li-Ion

Anvil Type

Detent

Speed Settings

4

Bluetooth Compatibility

No

Variable Speed Trigger

Yes

Motor Type

Brushless

Charger Included

No

No-Load Speed (RPM)

0 - 2200

CSA Safety

No

Drive Size

1/2 in

Case Included

No

No-Load Speed (IPM)

2700

Maximum Speed (RPM)

2200

Voltage

18V

Handle Type

Pistol

Speed

4

Drive Type

Square

ETL Safety

No

Battery System

LXT

Length

6.688 in.

Width

3.188 in.

Height

10.875 in.

Warranty Term

3 Year

Reviews :

Q & A :

Warranty:

Warranty Information

Makita Standard Warranty

The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).

This Warranty does not apply where:
  • Repairs have been made or attempted by others
  • Repairs are required because of normal wear and tear
  • The tool has been abused, misused or improperly maintained
  • Alterations have been made to the tool
In no event shall Makita be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies to both during and after the term of this warranty. Makita disclaims liability for any implied warranties, including implied warranties of "merchantability" and "fitness" for a specific purpose, after the one-year term of this warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.